How to use SCREW Unit
Use only the supplied SCREW Unit when mounting the rear side of this unit to a rigid
surface.
Wire Remote Controller
REC/PAUSE
REC
LED
Wire Remote Controller
Note
• The REC LED lights up during REC Mode.
• The REC LED flashes during REC/PAUSE Mode.
• The REC LED lights out during other modes.
• When REC/PAUSE switch is closed from open, mode is changed.
• Refer to Menu OSD: p. 30.
• Please consult your local dealer.
Notes On Operations
To Remote Terminal
Attachment Panel, etc
SCREW Unit (4 screws)
(Supplied)
ø2.5
-English-
25