Kia Spectra 2004 Manual page 231

Fig. 235: Applying Oil To HLA
Courtesy of KIA MOTORS AMERICA, INC.
2. Install HLA into cylinder head bore.
NOTE: If HLA is being reused, install it in its original position.
3. Check that HLA moves smoothly in its bore.
4. Apply clean engine oil to camshaft and camshaft bearing surfaces and install camshaft so that camshaft
dowel pins point straight up.
5. Install camshaft bearing caps according to cap number with the directional arrows pointing forward.
6. Install bolts to camshaft bearing caps and tighten in five or six steps in order shown in figure.
Tightening torque: 8.32~10.49 lb.ft (11.28~14.22 N.m, 1.15~1.45 kg.m)
domingo, 7 de febrero de 2021 08:29:53 a. m.
2004 Kia Spectra
2004 ENGINES 1.8L 4-Cylinder
Page 231 © 2011 Mitchell Repair Information Company, LLC.