Getting Started; Switching On And Setting The Clock; Changing The Clock Format; Automatic Power On Buttons - Pioneer X-NM1 Operating Instructions Manual

STANDBY STANDBY
/ON /ON
DISPLAY DISPLAY

Getting Started

Getting Started
Switching on and setting Switching on and setting
the clock the clock
This system has a built-in clock, which This system has a built-in clock, which
needs to be set to be able to use the needs to be set to be able to use the
timer features. timer features.
The clock can't be set when the The clock can't be set when the
demonstration mode is active. See page demonstration mode is active. See page
34 to cancel the demo mode. 34 to cancel the demo mode.
1 Press STANDBY/ON to 1 Press STANDBY/ON to
switch the system to standby. switch the system to standby.
2 Press and hold the MENU/ 2 Press and hold the MENU/
CLOCK button (front panel CLOCK button (front panel
only) for about two seconds. only) for about two seconds.
AM AM 12:OO 12:OO
3 Use ∞ and 5 to set the hour, 3 Use ∞ and 5 to set the hour,
then press ENTER. then press ENTER.
AM AM 2:OO 2:OO
4 Use ∞ and 5 to set the 4 Use ∞ and 5 to set the
minute, then press ENTER. minute, then press ENTER.
AM AM 2:4O 2:4O
After pressing After pressing , the display shows , the display shows
ENTER ENTER
the new time briefly, then returns to the new time briefly, then returns to
standby. standby.
AM AM 2:4O 2:4O
• When the system is on, press and • When the system is on, press and
hold hold (about three seconds) (about three seconds)
DISPLAY DISPLAY
anytime to see the clock. In standby, anytime to see the clock. In standby,
pressing pressing will switch on the will switch on the
DISPLAY DISPLAY
display backlight and briefly show the display backlight and briefly show the
current time. current time.
If the AC power is cut (blackout, If the AC power is cut (blackout,
accidentally unplugging the power accidentally unplugging the power
cord), the system will return to the cord), the system will return to the
12:00 display and you will have to set it 12:00 display and you will have to set it
again to show the proper time. again to show the proper time.
Changing the clock Changing the clock
format format
You can choose either a 12 or 24 hour You can choose either a 12 or 24 hour
format for the clock. The default is 12 format for the clock. The default is 12
hour display. hour display.
1 Switch the system into 1 Switch the system into
standby. standby.
2 Press and hold DISPLAY for 2 Press and hold DISPLAY for
about 3 seconds. about 3 seconds.
The format is changed and the new The format is changed and the new
clock format is shown in the display. clock format is shown in the display.
Automatic power on Automatic power on
buttons buttons
There are a number of buttons other There are a number of buttons other
than than / / which will switch which will switch
STANDBY STANDBY ON ON
the unit on. the unit on.
• • , , , , , and , and
CD CD LINE LINE TAPE TAPE
switch the unit on directly in to that switch the unit on directly in to that
function. (In the case of function. (In the case of
, if there is a disc/tape loaded it , if there is a disc/tape loaded it
TAPE TAPE
will start playing.) will start playing.)
0 on the front panel switches 0 on the front panel switches
• •
CD CD
the unit on and opens the disc cover. the unit on and opens the disc cover.
4 4
/ /
FM FM AM AM
and and
CD CD
13 13
En En