Table of Contents
Advertisement
Listening to the Radio
ENGLISH
E-16
Sound Control (See page 10.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "FM" or "AM" ap-
pears on the display.
When operating with the remote control, press the TUNER but-
ton, and then the BAND button to select "FM" or "AM".
3
Press the TUNING (
or
sired station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
z This can be operated by pressing the TUN. (
on the remote control.
z When radio interference occurs, auto scan tuning may stop
automatically at that point.
z Auto scan tuning will skip weak signal stations.
z To stop the auto tuning, press the TUNING button again.
z When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator
will light. Finally, the station name will appear.
z Full auto tuning can be achieved for RDS stations "ASPM"
see page 21.
) button to tune in to the de-
or
) button
Advertisement
Table of Contents
