Philips PET721D/12 Quick Start Manual

Philips Portable DVD Player PET721D/S/C

Quick start guide

1 Charge your battery
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
1 Slide the OFF ON switch to the OFF
position (charging of the DVD player only
possible in the power-off mode).
2 Connect the supplied power adaptor cord
(or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet)
to start charging.
➜ The CHG indicator turns red.
➜ When the battery is fully charged, the
indicator turns off.
3 Disconnect the power adaptor cord (or the car
adaptor) when the CHG indicator turns off.
Note:
– You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
Enjoy (Disc operation)
2
1 open the lid of the player.
2 Slide the OFF ON switch to ON to switch
on the DVD player.
➜ The POWER indicator turns on.
3 Slide OPEN on the player.
4 remove the protective card (if any) and load a
disc with the label side facing up.
5 Close the disc door.
➜ Playback will start automatically. If not, press
2;/OK.
6 To stop playback, press STOP.
Note:
During play, you can:
– Press OPTION to select some play options: audio,
subtitle, repeat, and time display.
– Press dir ectly to adjust brightness of screen
backlight to match lighting conditions.
3 oPEn hErE
Enjoy (AV oUT)
2
Connecting additional equipment
(TV for example)
1 Connect the AV oUT socket on the set to
the video and audio sockets on a TV as shown
directly.
2 Switch on the TV and set to the correct
video-in channel.
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a
rF modulator. Please consult your dealer.)
White
Not
Red
supplied
Yellow
Printed in China
TV
AUDIO IN
VIDEO IN
WK0913