Pre-Wash; Stain; Sensitive; Setting The Delay Timer - AEG LAVAMAT 74610 User Information

PRE-WASH

Warm pre-wash before the main wash cycle which follows automati-
cally; with intermediate spinning for
(EASY-CARES), without intermediate spinning for

STAIN

For heavily soiled or stained items. Stain treatment is rinsed in at an
optimal time in the programme.
Only for wash temperatures of 40° and upwards, as stain treatments are
effective only at higher temperatures.

SENSITIVE

Increased rinse effectiveness due to an additional rinse cycle with a
parallel decrease in drum movement (fabric care). Ideal if items must
be washed frequently e.g. due to extra sensitive skin.

Setting the delay timer

3
Using the
gramme by 30 minutes (30') to a maximum of 23 hours (23h).
1. Select the programme.
2. Press the
shows the desired time delay, e. g., 12h, if the programme is to start in
12 hours. The
3
If the display is showing 23h and you press the button again, the time
delay will be cancelled. 0' will appear followed by the length of the
wash programme that has been set.
3. To activate the delay timer, press the
time remaining to the start of the programme is continuously displayed
(e. g., 12h, 11h, 10h,... 30

Starting a programme

1. Check that the tap is turned on.
2. Press the
starts after the time delay set has elapsed.
3
If after pressing the
multi-display, the
acoustic signal sounds 4x, the door has not been correctly shut. Push
the door firmly closed and press the
14
button (DELAY TIMER) you can delay the start of a pro-
button (DELAY TIMER) repeatedly until the multi-display
indicator (DELAY TIMER) will light up.
'
etc.).
button (START/PAUSE). The programme is started or it
button (START/PAUSE) E40 flashes in the
(END) indicator flashes 4x and at the same time an
(COTTONS/LINEN) and
(DELICATES).
button (START/PAUSE). The
button (START/PAUSE) again.