PREFERENCES settings
Reset Menu settings
Screensaver
Preview Type
AUDIO settings
(underlined options are the factory default settings)
SPDIF Output
LPCM Output
TIPS:
The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu.
Setup Menu Options
(underlined options are the factory default settings)
Press to reset the menu settings of this recorder.
l
A warning message will appear. Select
proceed or
OK
CANCEL
The screen saver prevents damage to the TV screen by
avoiding exposure to a static image for too long.
Press to access this menu and use keys to select one of
l
the options.
On
{
}
– Select this if you wish to turn off the TV screen, after
playback had been stopped or paused for more than
15 minutes.
Off
{
}
– Select this to disable the screen saver.
Static
{
}
–Select this to display a static picture in the HDD index
preview menu.
Dynamic
{
} –Select this to repeatedly plays 15 seconds of video in
the HDD index preview menu.
Press to access this menu and use keys to select one of
l
the options.
{ RAW }
– Select this if you have used the recorder's COAXIAL
OUT jack to connect to a multichannel receiver.
{ LPCM }
– Select this if you have used the recorder's COAXIAL
OUT jack to connect to a stereo or audio/video
system.
This setting allows you to select between two levels:
{ LPCM 48 kHz} – Select this if the connected audio device is
{ LPCM 96 kHz} – Select this if the connected audio device is
OK
to abort, then press
capable of processing digital signal input with
sampling rates of 8 kHz. In addition, the disc
you are playing back must be recorded in 8kHz
LPCM format.
capable of processing digital signal input with
sampling rates of 96 kHz.In addition, the disc
you are playing back must be recorded in 96kHz
LPCM format.
(continued)
in the menu to
OK
OK
to confirm.
65