Philips HTS3378/93 User Manual page 41

[Picture Setting]
Selects a predefi ned set of picture colour
settings or customises the personal setting.
[Standard] – Original colour setting.
•
[Bright] – Vibrant colour setting.
•
[Soft] – Warm colour setting.
•
• [Personal] – Customises the colour
setting. Set the level of brightness,
contrast, sharpness/tint and colour
saturation, then press OK .
[HDMI Setup]
Selects the HDMI video setting when you
connect this Home Theater System and the
TV with a HDMI cable.
• [Wide Screen Format] – Defi nes the
wide screen format for disc play.
Option
[Superwide]
[4:3 Pillar Box]
[Off]
Note
•
This setting is only available if you have set the
Display] setting to [16:9 Wide Screen] .
Description
Centre position of the
screen is stretched
less than the side.
Applicable only to
720p and above video
resolution setting.
No stretching of the
picture. Black bars are
displayed on both sides
of the screen.
Picture is displayed
according to the format
of the disc.
[TV
• [HDMI Video] – Selects the HDMI video
output resolution that is compatible with
your TV display capability.
Option Description
[Auto] Detects and selects the
best supported video
resolution automatically.
[480i] , [576i] , Selects a video
[480p] , [576p] , resolution that is best
[720p] , [1080i] ,
supported by the TV.
[1080p]
See the TV manual for
details.
Note
•
If the setting is not compatible with your TV, a blank
screen appears. Wait for 15 seconds for auto recover
or switch to its default mode as follows:
1) Press . 2) Press . 3) Press
[Closed Caption]
Turns off or on display captions.
[On] – Shows the sound effects in
•
subtitles. Applicable only to discs with
Closed Caption information included and
the TV supports this feature.
[Off] – Disables closed caption.
•
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality. Video connection
through component video is required.
• [On] – Turns on progressive scan mode.
• [Off] – Disables progressive scan mode.
Tip
•
There is a more detailed description available (see
'Get started' > 'Turn on Progressive Scan').
.
EN 41