Programming Mode FAQ
1.
I got distracted while programming and forgot
which feature I was programming. What should
I do?
Return to 'Idle' Programming Mode and start
over. You will not be able to return to
Programming Mode (the radio does not provide
further way to let you know the specific stage
All manuals and user guides at all-guides.com
codes pool. For example, if you try to program
code 220, the radio would not accept it as the
maximum value allowed is 219. Same goes for
the frequencies. Refer to the"Frequency and
Code Charts" on page 58 to make sure you are
programming a valid value.
3.
I am trying to enter the Programming Mode but
the radio would not do it.