Table of Contents
Advertisement
Operating Instructions
Problem
The washing machine
vibrates during opera-
tion or is unstable.
Excessive foaming dur-
ing the main wash.
Water runs out from
under the washing
machine.
Fabric softener was not
washed in, compart-
ment w for condi-
tioners is filled with
water.
30
Possible Cause
The machine is not level.
There is very little washing in
the drum (e.g. only one
dressing gown).
The water could not be com-
pletely pumped out before
spinning because the drain-
age hose is kinked or the
drain pump is blocked.
Probably too much detergent
was used.
The screw connection on the
inlet hose is leaking.
The drainage hose is leaking.
The washing drain pump
cover is not correctly closed.
Washing is caught in the
door.
The emergency emptying
hose is not correctly closed
or is leaking.
The conditioner insert in the
compartment for the condi-
tioners is not correctly
attached or is blocked.
Remedy
Adjust the feet according to
the installation and connec-
tion instructions.
This does not impair the
function.
Check the the drain hose and
remove any kink if necessary,
or clean the drain pump and,
if required, remove foreign
bodies from the pump hous-
ing.
It may be necessary to
reduce the amount of deter-
gent used. Follow the deter-
gent manufacturer's
recommendations.
Tighten the inlet hose screw
connection
Check the drainage hose and
replace it if necessary.
Close cover correctly.
Stop the program and
remove the washing caught
in the door. Restart the
program.
Close the emergency empty-
ing hose correctly (see the
section "Carrying out emer-
gency emptying"). Call your
local Service Force Centre if
the emergency emptying
hose leaks.
Clean the detergent dis-
penser drawer and attach the
conditioner insert securely.
Hide quick links:
Advertisement
Table of Contents
