Primary Solid State Drive; Removing The Primary M.2 2230 Solid State Drive - Dell Latitude 5430 Rugged Service Manual

Steps
1. Align the pins on the battery with the connector on the system.
NOTE: Ensure that the metal pin of the battery is aligned in place.
2. Place the battery into the battery bay until it clicks into place.
3. Slide the battery latch to the locked state.
4. Ensure that the battery release latch is in the locked state.
Next steps
1. Follow the procedure in

Primary solid state drive

Removing the primary M.2 2230 solid state drive

Prerequisites
1. Follow the procedure in
2. Remove the battery.
About this task
The following images indicate the location of the primary solid state drive and provide a visual representation of the removal
procedure.
18 Removing and installing components
after working inside your
before working inside your
computer.
computer.