Sony VAIO PCG-FXA63 Quick Start Manual page 43

4 Press the Right Arrow
Down Arrow
default values for all SETUP items appears.
5 Press Enter. The Setup Confirmation window appears.
6 Select Yes, and press Enter.
7 Select Exit (Save Changes), and press Enter. The Setup Confirmation
window appears again.
8 Select Yes, and press Enter. The computer restarts.
✍
If this occurs on a regular basis, contact Sony Computing Support
(http://www.sony.com/pcsupport).
My computer starts, but the message "Operating system not
found" appears, and Windows does not start.
❑
If you have connected a docking station with a floppy disk drive or an
external floppy disk drive, make sure there is no disk in the floppy disk drive
(non-bootable).
❑
If a non-bootable floppy disk is in the drive, proceed as follows:
1 Turn off the computer, and remove the floppy disk.
2 Restart the computer and confirm that the Windows® operating system
starts properly.
❑
If Windows still does not start, follow these steps to initialize the BIOS:
1 Remove any floppy disk from the floppy disk drive.
2 Turn off the computer.
3 Remove any peripheral devices connected to the computer.
4 Restart the computer.
5 Press F2 when the Sony logo appears. The BIOS Setup menu window
appears.
6 Press the Right Arrow
7 Press the Down Arrow
message Load default values for all SETUP items appears.
key to select the Exit tab, and then press the
key to select Get Default Values. The message Load
key to select the Exit menu.
key to select Get Default Values. The
Troubleshooting Your Computer
43