Cpu_Fan1, Pump_Fan1, Sys_Fan1~5: Fan Connectors - MSI MAG B660 TOMAHAWK EVA e-PROJECT User Manual

CPU_FAN1, PUMP_FAN1, SYS_FAN1~5: Fan Connectors

Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. DC Mode fan connectors control fan speed by changing voltage.
However, you can follow the instruction below to adjust the fan connector to PWM or
DC Mode manually.
CPU_FAN1
SYS_FAN5
SYS_FAN4
SYS_FAN3
Switching fan mode and adjusting fan speed
You can switch between PWM mode and DC mode and adjust fan speed in BIOS >
HARDWARE MONITOR.
Select PWM mode or DC mode
⚠
Important
Make sure fans are working properly after switching the PWM/ DC mode.
Pin definition of fan connectors
1
1 Ground
3 Sense
26
Overview of Components
PUMP_FAN1
SYS_FAN1
SYS_FAN2
Connector
CPU_FAN1
PUMP_FAN1
SYS_FAN1~5
There are gradient points of the fan speed that allow you to adjust
fan speed in relation to CPU temperature.
PWM Mode pin definition
2 +12V
4 Speed Control Signal
Default fan Max.
mode current
PWM mode 2A
PWM mode 3A
DC mode 1A
1
DC Mode pin definition
1 Ground 2
3 Sense 4
Max.
power
24W
36W
12W
Voltage Control
NC