CompuSTAR 2WSSR-T11 Quick Start Manual page 2

REMOTE OPTION MENU
LCD
FEATURE
READOUT
Enter
Remote
2.5 Seconds
Menu
Move
Through
Menu
Move Up
Menu
Adjusts
Clock
Hour
Remote
Adjusts
Start
Hour
Time
Alarm
Adjusts
Clock
Hour
Time
Alarm On/ On or
Alarm
Off Off
To reprogram your remote, cycle the key in the ignition 5 times
within 7 seconds. Parking lights will flash. Then tap the Lock button
on your remote. Repeat for any additional remotes. If you receive
two parking light flashes, your Compustar has exited remote
programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from
8 AM to 5 PM PST.
QUICK START CARD
FUNCTION/
DESCRIPTION
Enter and Exit the Remote
Option Menu
Moves down the Remote
Option Menu
Moves back up the
Remote Option Menu
Adjusts Sets the time on your
Minute remote
Sets the time at which you
Adjusts
want your vehicle to start
every day. Check with your
Minute
installer for additional info.
Sets the time in which you
Adjusts
would like the remote's
Minute
alarm clock to alert you.
Turns the alarm clock
on or off
LCD
FEATURE
READOUT
RPS Call On or
Call
On/Off Off
On or
Silent Vibrate
Off
Volume VOL: 1 - 3
Tempera-
Temp F or C
ture
On or
Auxiliary AUX
Off
On or
Sliding Sliding
Doors Door
Off
2 Way
Full or
Paging Paging
Half
Display
Adjusts
Screen
Screen screen off
Timeout
time
English /
Adjusts
Language Francais /
Language
Espanol
2WSSR-T11
FUNCTION/
DESCRIPTION
Turns your RPS Touch
paging feature on or off.
Turns the silent mode on
or off.
Adjust the volume of your
remote. 1 is the lowest.
3 is the highest.
Changes the temperature
readout from Fahrenheit
to Celsius.
Turns your Auxiliary
Extender feature on or off.
Allows you to use the Lock
and Unlock buttons for
sliding doors via Aux 1
and 2.
Sets your remote for Alarm
or Starter Only systems. Set
to FULL for ALARM IT and
MAX IT features. Set to HALF
for START IT ONLY systems.
Adjusts the time your LCD
will stay on after a button
is pressed
Changes LCD display
language from English to
French or Spanish
Firstech, LLC. | 2