Toshiba MK6017MAP Product Specification
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Storage
  5. MK6017MAP
  6. Product specification

Toshiba MK6017MAP Product Specification

Toshiba hard disk drive product specification
Hide thumbs
Table of Contents

Advertisement

Quick Links

Storage Device Division
MK6017MAP
(
)
HDD2155
HARD DISK DRIVE

PRODUCT SPECIFICATION

Rev 00
October 2000
DOCUMENT NUMBER
14603

Advertisement

Table of Contents
loading

Related Manuals for Toshiba MK6017MAP

Summary of Contents for Toshiba MK6017MAP

  • Page 1: Product Specification

    Storage Device Division MK6017MAP HDD2155 HARD DISK DRIVE PRODUCT SPECIFICATION Rev 00 October 2000 DOCUMENT NUMBER 14603...
  • Page 2 360014937 No.5T03670-2D ＴＯＳＨＩＢＡ 2.5 inch Disk Drives MK6017MAP Product Specification ＴＩＴＬＥ： 日 付 DATE Initial issue 2000-10-06 ＴＯＳＨＩＢＡ ＣＯＲＰＯＲＡＴＩＯＮ Copyright ©2000 Toshiba corporation. All rights reserved. - 502 - 記 事 部 門 CONTENTS DEP. D-SETSU2 担 当 承 認...

  • Page 3: Limitation Of Liability

    Gives you helpful information. NOTE LIMITATION OF LIABILITY ・Toshiba Corporation shall not be liable for any damage due to the fault or negligence of users, fire, earthquake, or other accident beyond the control of Toshiba Corporation. ・Toshiba Corporation shall not be liable for any incidental or consequential damages...
  • Page 4 USAGE RESTRICTIONS ● Since the drive is not designed or manufactured to be used for a system including equipment (*1) directly linked with human life, etc., Toshiba Corporation shall not be liable for this type of use. *1: Equipment directly linked with human life, etc. corresponds to the following.
  • Page 5 Dropping may cause injury. ■ Do not touch sharp edges or pins of the drive. Sharp protrusions etc. may cause injury. Hold the drive by both sides when carrying it. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 505 -...
  • Page 6 Avoid attachment of these materials. ●Do not place objects which generate magnetic fields such as magnets, speakers, etc. near the drive. Magnetism may cause damage to the drive or data loss. Copyright ©2000 Toshiba corporation. All rights reserved. - 506 - NOTE...

  • Page 7: Table Of Contents

    ATA interface connector... 528 10.3.2 Pin Assignment ... 529 10.3.3 Signal Treatment ... 530 10.3.4 Series resistance ... 531 Copyright © 2000 Toshiba corporation. All rights reserved..516 FFICIENCY ... 517 ... 522 ） ... 523 (PM) ... 524 ...
  • Page 8 SECURITY ERASE PREPARE (F3h)...589 10.8.30 SECURITY ERASE UNIT (F4h)...590 10.8.31 SECURITY FREEZE LOCK (F5h)...590 10.8.32 SECURITY DISABLE PASSWORD (F6h) ...591 10.8.33 SMART Function Set...592 10.9 ECURITY EATURE Copyright ©2000 Toshiba corporation. All rights reserved. - 508 - ...533 ...550 ...559 (F8h) ...586 ...609...
  • Page 9 11.3 DATA COMMANDS 11.4 DATA TRANSFER COMMANDS 11.5 DMA... 623 LTRA 11.6 ... 626 THER TIMINGS Copyright © 2000 Toshiba corporation. All rights reserved. EPORTING ECHNOLOGY ... 614 ONTROL ... 616 ... 617 ... 619 ... 620 ... 621 ... 622 ...
  • Page 10 10.9-1 S ECURITY MODE COMMAND ACTIONS ABLE 10.12-1 I ABLE NITIALIZATION OF 11.6-1 O ..626 ABLE THER TIMINGS Copyright ©2000 Toshiba corporation. All rights reserved. - 510 - Table of Figures ...519 ...521 ...528 ...610 ON FLOW ...611 ...616...

  • Page 11: Scope

    1. SCOPE This document describes the specifications of the following model, MK6017MAP of 2.5- inch type Winchester disk drives. Factory Number HDD2155 2. GENERAL DESCRIPTION MK6017MAP which is noted hereinafter as ‘ ‘ a series of intelligent disk drives .
  • Page 12 ●Labels and the like attached to the drive are also used as hermetic sealing for maintenance of its performance. Do not remove them from the drive. Copyright ©2000 Toshiba corporation. All rights reserved. - 512 - ■ ■ ■ ■ Do not disassemble, remodel or repair.

  • Page 13: Key Features

    Automatic carriage lock secures heads on the ramp with high immunity against non operating shock up to 6,860 m/s 2 (700G). Low power consumption Low power consumption by Adaptive Power Mode Control . Copyright © 2000 Toshiba corporation. All rights reserved. 4 sec. Advanced PIO mode supported. 360014937...

  • Page 14: Basic Specification

    Bit / mm ( BPI ) Flux change / mm ( FRPI ) Number of disks Number of data heads Number of user data cylinders Bytes per sector Copyright ©2000 Toshiba corporation. All rights reserved. - 514 - MK6017MAP 6.007 Sector Servo 32/34 TC-MEEPR4+PP 1667 (42.3k)

  • Page 15: Performance

    <*5> Typical values are for the condition of normal voltage, 25 o C normal temperature and placing bottom side down. Maximum values are for all conditions specified in this document. Copyright © 2000 Toshiba corporation. All rights reserved. 4,200 + 0.1% 133.0∼253.5...

  • Page 16: Power Requirements

    If the 5V Logic is separated from 5V Motor, both lines should be turned on and off at the same time within the time period of one second . Copyright ©2000 Toshiba corporation. All rights reserved. - 516 - 5V + 5%...

  • Page 17: Mechanical Specifications

    ●Do not place objects which generate magnetic fields such as magnets, speakers, etc. near the drive. Magnetism may cause damage to the drive or data loss. Copyright © 2000 Toshiba corporation. All rights reserved. Figure 1 and Table 7.4-1 show an outline of the drive. 94gram(max.)

  • Page 18: Screwing

    PCB. Be sure to use ESD proof wrist strap when handling the drive. ⑨ A rattle heard when the drive is moved is not a sign of failure. Copyright ©2000 Toshiba corporation. All rights reserved. - 518 -...
  • Page 19 360014937 UNIT: mm MK6017MAP Dimensions Figure 1 Copyright © 2000 Toshiba corporation. All rights reserved. 519 -...
  • Page 20 360014937 Dimension (*)SFF-8200,8201,8212:Small Form Factor Standard Copyright ©2000 Toshiba corporation. All rights reserved. - 520 - SFF-8200 Rev1.1(*) SFF-8201 Rev1.2 MK6017MAP SFF-8212 Rev1.2 Millimeters Inches − − − − − − 69.85 2.750 0.25 0.010 101.85 max 4.010 max 100.00 0.41 3.99...
  • Page 21 360014937 Mounting Recommendation Figure 2 Copyright © 2000 Toshiba corporation. All rights reserved. 521 -...

  • Page 22: Environmental Limits

    ( Packed in Toshiba’s original shipping package. ) 8%- 90% R.H. ( No condensation. ) 8%- 90% R.H. ( No condensation. ) 5%- 90% R.H. ( Packed in Toshiba’s original shipping package. ) 29 o C (Operating) 40 o C (Non- operating) 9.8 m/s 2 ( 1.0G )

  • Page 23: Altitude

    8.7 EMC Adaptability The drive satisfies the following standards . EN50081-1 EN50082-1 Copyright © 2000 Toshiba corporation. All rights reserved. - 300 m to 3,000 m - 400 m to 15,000 m For idle mode ( Spindle in rotating ).

  • Page 24: Reliability

    A defective drive should be replaced. Parts and subassemblies should not be repaired individually . 9.5 Preventive Maintenance (PM) No preventive maintenance is required. Copyright ©2000 Toshiba corporation. All rights reserved. - 524 - 300,000 hours 2,800 hours ( 200 days x 14 hours ) / year) 600 hours ( 200 days x 3 hours ) / year) 1.30 x 10 6 seeks / month...

  • Page 25: Load/Unload

    SPM to the voice coil. In this case, Emergency Unload is performed 20,000 times maximum. Emergency Unload should be used only when the host-system cannot perform normal operation. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 525 -...

  • Page 26: Host Interface

    10.1.2 Cable The following table shows preferable twisted pair type of cable . Standard diameter Characteristics impedance Copyright ©2000 Toshiba corporation. All rights reserved. - 526 - X3T10.279-199x X3T10/2008D Revision 6 October 26, 1995 T13/1153D Revision 17 October 30, 1997...

  • Page 27: Electrical Specification

    (note 2) Except for signal lines pulled up as shown in Table 10.3.3-1 10.2.2.2 Output item unit voltage high Copyright © 2000 Toshiba corporation. All rights reserved. unit value 2.0 to (supply voltage +0.5 ) -0.3 to 0.8 + 10 (note 2)

  • Page 28: Interface Connector

    360014937 10.3 Interface connector 10.3.1 ATA interface connector 2.00 2.00 24 = 48.00 Polarity key Figure 3 ATA interface connector Copyright ©2000 Toshiba corporation. All rights reserved. - 528 -...

  • Page 29: Pin Assignment

    DA 0 - CS0 - DASP + 5V (LOGIC) GROUND Note) Symbol (-) in front of signal name shows negative logic. Copyright © 2000 Toshiba corporation. All rights reserved. Table 10.3-1 Signal pin assignment PIN No. SIGNALS GROUND DD 8...

  • Page 30: Signal Treatment

    - CS0 - CS1 - DASP TP = Totem Pole, TS = Tri-State, PD = Pull Down, PU = Pull-Up, OD = Open Drain Copyright ©2000 Toshiba corporation. All rights reserved. - 530 - Table 10.3-2 Signal treatment Driven by...

  • Page 31: Series Resistance

    O (*1) DD 15- 0 18- 3 DMARQ - DIOW STOP - DIOR -HDMARDY HSTROBE IORDY -DDMARDY DSTROBE Copyright © 2000 Toshiba corporation. All rights reserved. SERIAL RESISTANCE VALUE 82Ω 82Ω 82Ω 82Ω 82Ω 22Ω 22Ω 22Ω 33Ω DESCRIPTION Reset signal from the host system; It shall be active low when system is powered-up or when voltage fault is detected.
  • Page 32 I’ (*1) ‘ is from the drive to the host system, ‘ Copyright ©2000 Toshiba corporation. All rights reserved. - 532 - This pin and J2 (see 10.7) are used to determine the drive address, Master or Slave. When J2 is ground, the drive works as a Master and when J2 is open, the drive works as a Slave.

  • Page 33: Host Interface Timing

    ) -IOCS16 shall be specified in ATA-2 specifications. For other modes, this signal is invalid. The Drive releases -IOCS16 within the time of t determined by pull up resistance, output impedance and line capacitance. Copyright © 2000 Toshiba corporation. All rights reserved. CICSV AICSV Transfer mode (min.)

  • Page 34: Program I/O Read Timing

    ) -IOCS16 is specified in ATA-2 specifications. For other modes, this signal is invalid. Drive releases -IOCS16 within the time of t AICSI resistance, output impedance and line capacitance. Copyright ©2000 Toshiba corporation. All rights reserved. - 534 - RDSE CICSV...

  • Page 35: Single Word Dma Write Timing

    Meaning Cycle time DMACK to DMARQ delay -DOW 16-bit -DOW data setup -DOW data hold DMACK to -DOW setup -DOW to DMACK hold Copyright © 2000 Toshiba corporation. All rights reserved. MODE 0 MODE 1 Min. Max. Min. Max. 360014937 MODE 2 Min.

  • Page 36: Single Word Dma Read Timing

    DMACK to DMARQ delay -DIOR 16-bit -DIOR data access -DIOR data hold DMACK to -DIOR setup -DIOR to DMACK hold -DIOR setup Copyright ©2000 Toshiba corporation. All rights reserved. - 536 - MODE 0 MODE 1 Min. Max. Min. Max.

  • Page 37: Multiword Dma Write Timing

    -DIOW 16-bit -DIOW data setup -DIOW data hold DMACK to -DIOW setup -DIOW to DMACK hold -DIOW negated pulse width -DIOW to DMARQ delay Copyright © 2000 Toshiba corporation. All rights reserved. MODE 0 MODE 1 Min. Max. Min. Max.

  • Page 38: Multiword Dma Read Timing

    -DIOR data access -DIOR data hold -DIOR to tristate DMACK to -DIOR setup -DIOR to DMACK hold -DIOR negated pulse width -DIOR to DMARQ delay Copyright ©2000 Toshiba corporation. All rights reserved. - 538 - MODE 0 MODE 1 Min. Max. Min.

  • Page 39: Ultra Dma Timing

    10.4.7 Ultra DMA Timing Initiating an Ultra DMA data in burst DMARQ (device) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (device) DD(15:0) DA0, DA1, DA2, CS0-, CS1- Copyright © 2000 Toshiba corporation. All rights reserved. ZIORDY 360014937 539 -...
  • Page 40 DSTROBE at host DD(15:0) at host Host pausing an Ultra DMA data in burst DMARQ (device) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (device) DD(15:0) (device) Copyright ©2000 Toshiba corporation. All rights reserved. - 540 - 2CYC 2CYC...
  • Page 41 Device terminating an Ultra DMA data in burst DMARQ (device) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (device) DD(15:0) DA0, DA1, DA2, CS0-, CS1- Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 IORDYZ 541 -...
  • Page 42 360014937 Host terminating an Ultra DMA data in burst DMARQ (device) DMACK- (host) STOP (host) HDMARDY- (host) DSTROBE (device) DD(15:0) DA0, DA1, DA2, CS0-, CS1- Copyright ©2000 Toshiba corporation. All rights reserved. - 542 - IORDYZ...
  • Page 43 Initiating an Ultra DMA data out burst DMARQ (device) DMACK- (host) STOP (host) DDMARDY- (device) HSTROBE (host) DD(15:0) (host) DA0, DA1, DA2, CS0-, CS1- Copyright © 2000 Toshiba corporation. All rights reserved. ZIORDY 360014937 543 -...
  • Page 44 HSTROBE at device DD(15:0) at device Device pausing an Ultra DMA data out burst DMARQ (device) DMACK- (host) STOP (host) DDMARDY- (device) HSTROBE (host) DD(15:0) (host) Copyright ©2000 Toshiba corporation. All rights reserved. - 544 - 2CYC 2CYC...
  • Page 45 Host terminating an Ultra DMA data out burst DMARQ (device) DMACK- (host) STOP (host) DDMARDY- (device) HSTROBE (host) DD(15:0) (host) DA0, DA1, DA2, CS0-, CS1- Copyright © 2000 Toshiba corporation. All rights reserved. IORDYZ 360014937 545 -...
  • Page 46 360014937 Device terminating an Ultra DMA data out burst DMARQ (device) DMACK- (host) STOP (host) DDMARDY- (device) HSTROBE (host) DD(15:0) (host) DA0, DA1, DA2, CS0-, CS1- Copyright ©2000 Toshiba corporation. All rights reserved. - 546 - IORDYZ...
  • Page 47 Ready to final Strobe Ready to pause Pullup before IORDY IORDYZ Wait before IORDY ZIORDY Setup hold for DACK Strobe to DREQ/Stop Copyright © 2000 Toshiba corporation. All rights reserved. MODE 0 MODE 1 MODE 2 Min. Max. Min. Max.

  • Page 48: Reset Timing

    RESET pulse width (Low) RESET inactive to BSY active 10.5 Grounding HDA (Head Disk Assembly) and DC ground(ground pins on interface) are connected electrically each other. Copyright ©2000 Toshiba corporation. All rights reserved. - 548 - BUSY - RESET Minimum...

  • Page 49: Address Decoding

    DD7 signal to prevent possible conflict with floppy disk implementations. The drive supports this register to maintain compatibility for ATA-1. Copyright © 2000 Toshiba corporation. All rights reserved. Table 10.6-1 Register map...

  • Page 50: Register Description

    This command provides a path for the parameter including interleave table in a sector length. 10.7.1.5 Identify Device command Drive information is transferred during the execution of this command. Copyright ©2000 Toshiba corporation. All rights reserved. - 550 - DA2-DA0 : 0...

  • Page 51: Error Register

    ID field. The mark does not exist when shipping from the factory.The Mark will be written by FORMAT command. Read or Write commands will not be executed in any data fields marked bad. The drive does not support this bit. Copyright © 2000 Toshiba corporation. All rights reserved. A7 - A0 D511...

  • Page 52: Features Register (Write Precompensation Register)

    This register returns a value in accordance with the operation mode (idle mode or stand-by mode). 10.7.4.4 Set Features Command If features register for this command is 03h, this register sets the data transfer mode. Copyright ©2000 Toshiba corporation. All rights reserved. - 552 - Table 10.7-1 Diagnostic mode error register...

  • Page 53: Sector Number Register

    Bits 0 - 7 of the last logical block address. Cylinder High Register Bits 2 1 0 Cylinder Bits 15 14 13 12 11 10 9 Copyright © 2000 Toshiba corporation. All rights reserved. DA2-DA0 : 3 Read / Write DA2-DA0 : 4 Read / Write DA2-DA0 : 5...

  • Page 54: Device/Head Register

    Bit 0 least-significant bit. If the L bit is equal to one (LBA Mode), the HS3 through HS0 bits contain bits 27 through 24 of the LBA. Copyright ©2000 Toshiba corporation. All rights reserved. - 554 - DA2-DA0 : 6...

  • Page 55: Status Register

    ATA-2 Notes: Prior to ATA-2 standard, this bit indicated that the device was on track. This bit may be used for other purposes in future standards. For compatibility the drive supports this bit as ATA-1 specifies. User is recommended not to use this bit. Copyright © 2000 Toshiba corporation. All rights reserved. DA2-DA0:7...

  • Page 56: Command Register

    Any code NOT defined in the following list causes an Aborted Command error. Interrupt request (INTRQ) is reset when a command is written. The following are acceptable commands to the command register. Copyright ©2000 Toshiba corporation. All rights reserved. - 556 -...
  • Page 57 DRV = DRIVE SELECT bit (bit 4 in DRIVE/HEAD register) HD = HEAD SELECT bits (bit 3-0 in DRIVE/HEAD register) FT = FEATURES register (WRITE PRECOMPENSATION register) Copyright © 2000 Toshiba corporation. All rights reserved. Table 10.7-2 Command Code Command Code...

  • Page 58: Alternate Status Register

    DD7 signal to prevent possible conflict with floppy disk implementations. The drive supports this register to maintain compatibility for ATA-1. Copyright ©2000 Toshiba corporation. All rights reserved. - 558 - DA2-DA0 : 6...

  • Page 59: Command Descriptions

    STANDBY IMMEDIATE WRITE BUFFER WRITE DMA WRITE LONG WRITE MULTIPLE WRITE SECTOR(S) WRITE VERIFY Invalid command code = valid on this command Copyright © 2000 Toshiba corporation. All rights reserved. Status register DRDY CORR ICRC 360014937 Error register IDNF ABRT...

  • Page 60: Nop (00H)

    BSY and generates an interrupt. ATA/ATAPI-4 defines this command as Vendor specific. The drive supports this command to maintain ATA-3, and the previous models compatibility. User is recommended not to use this command. Copyright ©2000 Toshiba corporation. All rights reserved. - 560 - REGISTER...

  • Page 61: Read Sector (20H/21H)

    (implied seek). After transferring the last data in the buffer, it resets BSY and issues an interrupt. ATA/ATAPI-4 defines this command as Vendor specific. The drive supports this command to maintain ATA-3, and the previous models compatibility. User is recommended not to use this command. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...

  • Page 62: Write Long (32H/33H)

    User is recommended not to use this command. ATA/ATAPI-4 defines this command as Vendor specific. The drive supports this command to maintain ATA-3 compatibility. User is recommended not to use this command. Copyright ©2000 Toshiba corporation. All rights reserved. - 562 - REGISTER...

  • Page 63: Format Track (50H)

    0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, 0000, ... 0000, 0000, 0000. ATA/ATAPI-4 defines this command as Vendor specific. The drive supports this command to maintain ATA-3, and the previous models compatibility. User is recommended not to use this command. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...

  • Page 64: Seek (7Xh)

    ATA-2 Notes: Prior to ATA-2 standard, this bit indicated that the device was on track. This bit may be used for other purposes in future standards. For compatibility the drive supports this bit as ATA-1 specifies. User is recommended not to use this bit. Copyright ©2000 Toshiba corporation. All rights reserved. - 564 -...

  • Page 65: Initialize Device Parameters (91H)

    Logical Block Address (LBA). ‘ ‘ ID Not Found’ ’error also occur when this LBA exceeds the total number of user addressable sectors. The command does not affect LBA address mode. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER...

  • Page 66: Read Multiple (C4H)

    . Interrupts are generated when DRQ is set at the beginning of each block or partial block. Copyright ©2000 Toshiba corporation. All rights reserved. - 566 -...

  • Page 67: Write Multiple (C5H)

    After the transfer of a data block which contains a sector with error, the contents of the Command Block Registers are undefined. The host should retry the transfer as individual requests to obtain valid error information. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...

  • Page 68: Set Multiple Mode (C6H)

    When a command is completed, CY, HD, SN register (LBA register) shows the sector transferred the latest. If the drive detects unrecoverable error, the drive terminate the command and CY, HD, SN register (LBA register) shows the sector where error occurred. Copyright ©2000 Toshiba corporation. All rights reserved. - 568 - REGISTER...

  • Page 69: Write Dma (Cah/Cbh)

    When a command is completed, CY, HD, SN register (LBA register) shows the sector transferred the latest. If the drive detects unrecoverable error, the drive terminates the command and CY, HD, SN register (LBA register) shows the sector where error has occurred. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...

  • Page 70: Power Control (Exh)

    If stand-by timer is enabled, timer will start. After the drive enters the idle mode, the drive issues interrupt to report the host that the command has been completed. Copyright ©2000 Toshiba corporation. All rights reserved. - 570 -...
  • Page 71 When SC=X, the drive enters sleep mode immediately. After entering the sleep mode, the drive issues an interrupt to report the host that the command has been completed. The drive recovers from sleep mode and enters stand-by mode by receiving a reset. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 571 -...

  • Page 72: Read Buffer (E4H)

    . When this command is issued, the drive will set up the buffer for write operation, and set DRQ. The host may then write up to 512 bytes of data to the buffer. Copyright ©2000 Toshiba corporation. All rights reserved. - 572 -...

  • Page 73: Identify Device (Ech)

    DRQ bit, and issues an interrupt. The host may read the parameter information of the sector buffer. The parameter words in the buffer are arranged as shown in Table10.8.23-1∼3. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...
  • Page 74 1=the fields reported words 54-58 are valid 0=the fields reported words 54-58 are not valid Number of current cylinders Number of current heads Number of current sectors per track Copyright ©2000 Toshiba corporation. All rights reserved. - 574 - Table 10.8-1 Identify Information DESCRIPTION Hex.
  • Page 75 ATA-3 defines this field as “Vendor specific (obsolete)” To maintain compatibility between ATA-2, the drive supports this field as specified in ATA-2. This field may be used for other purposes in future models. Copyright © 2000 Toshiba corporation. All rights reserved. Table 10.8-2 Identify Information (Continued)
  • Page 76 Time required for security erase unit completion Reserved Current Advanced Power Management setting 15-8 Reserved 7-0 Current Advanced Power Management setting set by Set Features Command Copyright ©2000 Toshiba corporation. All rights reserved. - 576 - Table 10.8-3 Identify Information (Continued) DESCRIPTION Hex. 4108...
  • Page 77 1=Security count expired 1=Security frozen 1=Security locked 1=Security enabled 1=Security supported 129-254 Reserved Integrity word 15-8 Checksum Signature Copyright © 2000 Toshiba corporation. All rights reserved. Table 10.8-4 Identify Information (Continued) DESCRIPTION 360014937 Hex. XXXX XXXX 0000 0000 0XXX 0000...
  • Page 78 It is vendor specific ECC transfer length for READ/WRITE LONG commands, specified by SET FEATURE command with FEATURES RESISTERS = 44H. The value for this WORD is 002Eh. Copyright ©2000 Toshiba corporation. All rights reserved. - 578 - [*1] : Word 1 [*2] : Word 3 [*3] : Word 6 12416 −...
  • Page 79 If the number of heads and sectors exceed the drive parameter, bit 0 and related WORD 54-58 shall be cleared to 0. The default value for this WORD is 0007h. Copyright © 2000 Toshiba corporation. All rights reserved. TOSHIBA MK6017MAP_..._ −...
  • Page 80 60 bit 15- 8 The power on values for each models are. Drive Type MK6017MAP − − Copyright ©2000 Toshiba corporation. All rights reserved. - 580 - [*4] : Word 57 - 58 11,733,120(B30880H) − − =Write / Read multiple command with 1 Interrupt [*5] : Word 60 –...
  • Page 81 If this bit is supported, word 53 bit 1 is to be set. The drive that support PIO mode 3 or higher shall support this field too. This figure shall not be less than 120. The value for this WORD is 0078h (120ns). Copyright © 2000 Toshiba corporation. All rights reserved. 360014937...
  • Page 82 The value for this WORD is 4108h. WORD 84: Features / Command sets supported bit 15 0 (Fixed) bit 14 1 (Fixed) bit 13-0 Reserved The value for this WORD is 4000h. Copyright ©2000 Toshiba corporation. All rights reserved. - 582 -...
  • Page 83 1=Mode 3 is supported bit 2 1=Mode 2 is supported bit 1 1=Mode 1 is supported bit 0 1=Mode 0 is supported The default value for this WORD is 001Fh Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 583 -...
  • Page 84 01=a jumper was used. 10=the CSEL signa was used. 11=some other method was used or the method is unknown. 1 (Fixed) Copyright ©2000 Toshiba corporation. All rights reserved. - 584 - ACTUAL VALUE Not specified ( Timer ×2 ) minuites...
  • Page 85 7:0 in word 255. Each byte shall be added with unsigned arismetic, and overflow shall be ignored. The sum of all 512 bytes is zero when the checksum is correct. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937...

  • Page 86: Set Max Address (F9H)

    This command sets the maximum address in CY, HD, SN register. If LBA ( DRV / HD register bit6 ) is set to 1, the maximum address shall be LBA value. Copyright ©2000 Toshiba corporation. All rights reserved. - 586 -...

  • Page 87: Set Features (Efh)

    4 bytes ECC, look-ahead read enabled, write cache enabled, advanced power management enabled, READ/WRITE Multiple command enabled (16 sectors) and reverting to power on defaults by soft reset disabled. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...

  • Page 88: Security Set Password (F1H)

    The master password previously set is still stored in the drive but will not be used to unlock the drive. Master Maximum This combination will set a master password but will not enable the lock function Copyright ©2000 Toshiba corporation. All rights reserved. - 588 - REGISTER NORMAL COMPLETION no change...

  • Page 89: Security Unlock (F2H)

    The SECURITY ERASE PREPARE command must be issued immediately before the SECURITY ERASE UNIT command to enable the drive erase and unlock. This command can prevent accidental erasure of the drive. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...

  • Page 90: Security Erase Unit (F4H)

    Following commands are rejected when the drive is in SECURITY FREEZE LOCK mode. SECURITY SET PASSWORD SECURITY UNLOCK SECURITY DISABLE PASSWORD SECURITY ERASE UNIT Copyright ©2000 Toshiba corporation. All rights reserved. - 590 - REGISTER NORMAL COMPLETION no change no change...

  • Page 91: Security Disable Password (F6H)

    Word Control word Bit 15-1 Bit 0 1-16 Password (32 bytes) 17-255 Reserved Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION no change no change no change no change no change no change Security Disable Information...

  • Page 92: Smart Function Set

    SMART SAVE ATTRIBUTE VALUES SMART EXECUTE OFF-LINE IMMIDIATE SMART READ LOG SECTOR SMART WRITE LOG SECTOR SMART ENABLE OPERATIONS SMART DISABLE OPERATIONS SMART RETURN STATUS SMART ENABLE/DISABLE AUTOMATIC OFF-LINE Copyright ©2000 Toshiba corporation. All rights reserved. - 592 - Code...
  • Page 93 BYTE 0-1: Data structure revision number 0 0 0 6 h is set BYTE 2-361: Individual attribute data The following table defines 12BYTE data for each Attribue data. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION no change...
  • Page 94 Load Retry Count Load Friction Load Cycle Count Load in Time Power-off Retract Count Write Head Copyright ©2000 Toshiba corporation. All rights reserved. - 594 - Description condition. Product life period may expired. condition. The drive may have failure. operation.
  • Page 95 If this bit is cleared to zero, the device does not support off-line read scanning. If this bit is set to one, the device supports off-line read scanning. This bit is set to 1. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937...
  • Page 96 Polling before this time could extend the self-test execution time or abort the test depending on the state of bit 2 of the off-line data capability bits. BYTE 374-510: Reserved BYTE 511: Data structure checksum Checksum of the first 511 byte Copyright ©2000 Toshiba corporation. All rights reserved. - 596 -...
  • Page 97 FEh, FFh= Not in use 2-11 Reserved BYTE 362-510: Reserved BYTE 511: Data structure checksum The checksum of the first 511 byte. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION no change no change no change no change...
  • Page 98 C24Fh This command immediately saves changed attribute values. Upon receipt of the command, the drive sets BSY, saves the attribute values, clears BSY and issues an interrupt. Copyright ©2000 Toshiba corporation. All rights reserved. - 598 - REGISTER NORMAL COMPLETION...
  • Page 99 EXECUTE OFF-LINE IMMEDIATE command from the host, the device shall abort the subcommand routine and service the host within two seconds after receipt of the command. The device shall then service the new SMART EXECUTE OFF-LINE IMMEDIATE subcommand. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...
  • Page 100 Depending on the value in the Sector Number register, this self-test routine may be performed in either the captive or the off-line or mode. This self-test routine should take on the order of tens of minutes to complete. Copyright ©2000 Toshiba corporation. All rights reserved. - 600 -...
  • Page 101 An error log data structure shall be presented for each of the last five errors reported by the device. These error log data structure entries are viewed as a circular buffer. That is, the first error shall create the first error log data Copyright © 2000 Toshiba corporation. All rights reserved. 1 0 1 1 0 0 0 0...
  • Page 102 Content of the Device/Head register when the Command register was written. Content written to the Command register. Timestamp Timestamp n+10 Timestamp n+11 Timestamp Copyright ©2000 Toshiba corporation. All rights reserved. - 602 - Error log data structure Command data structure...
  • Page 103 If the maximum value for this field is reached, the count shall remain at the maximum value when additional errors are encountered and logged. Copyright © 2000 Toshiba corporation. All rights reserved. Error data structure...
  • Page 104 Content of the self-test failure checkpoint byte shall be the content of the self-test failure checkpoint byte when the nth self-test was completed. Copyright ©2000 Toshiba corporation. All rights reserved. - 604 - Self-test log data structure Self-test log descriptor entry...
  • Page 105 Each byte shall be added with unsigned arithmetic, and overflow shall be ignored. The sum of all 512 bytes is zero when the checksum is correct. The checksum is placed in byte 511. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937...
  • Page 106 REGISTER SETTING DRIVE No. C24Fh Log Sector Address This command writes an indicated number of 512 byte data sectors to the indicated log. Copyright ©2000 Toshiba corporation. All rights reserved. - 606 - REGISTER NORMAL COMPLETION no change no change...
  • Page 107 After receipt of this command by the drive, all other SMART commands, except for SMART ENABLE OPERATIONS, are disabled and invalid and will be aborted by the drive (including SMART DISABLE OPERATIONS commands) with an Aborted command error. Copyright © 2000 Toshiba corporation. All rights reserved. REGISTER NORMAL COMPLETION...
  • Page 108 Any other non-zero value written by the host into this register before issuing this subcommand is vendor specific. Automatic off-line data collection is executed every 24 power-on hours. Copyright ©2000 Toshiba corporation. All rights reserved. - 608 - REGISTER...

  • Page 109: Security Mode Feature Set

    10.9.2 Initial setting of the user password When a user password is set, the drive automatically enters lock mode by the next powered-on . Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 609 -...

  • Page 110: Security Mode Operation From Power-On

    In locked mode, the drive rejects media access commands until a SECURITY UNLOCK command is successfully completed. UNLOCK Password match? Unlock mode commands are available Frozen mode commands Figure 4 Copyright ©2000 Toshiba corporation. All rights reserved. - 610 - Power-on Locked mode ERASE Media access PREPARE ERASE Reject UNIT...

  • Page 111: Password Lost

    User password lost ERASE PREPARE with master password If both the user password and the master password are lost, the drive cannot be in normal operation mode. Copyright © 2000 Toshiba corporation. All rights reserved. High Level? UNLOCK with master password...

  • Page 112: Command Table

    WRITE DMA WRITE LONG WRITE MULTIPLE WRITE SECTORS WRITE VERIFY Copyright ©2000 Toshiba corporation. All rights reserved. - 612 - Table 10.9-1 Security mode command actions Locked mode O: Drive executes command normally X: Drive rejects command with an Aborted command error...

  • Page 113: Self-Monitoring, Analysis And Reporting Technology

    10.10.3 SMART function default setting The drives are shipped from the drive manufacturer’s factory with the SMART feature disabled. SMART feature shall be enabled by the system manufacturer or the application. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 613 -...

  • Page 114: Adaptive Power Mode Control

    For the current models without Adaptive Power Mode Control, transition time to Idle mode is Timer based. For the new model, the transition time changes dynamically in accordance with the current command pattern. Copyright ©2000 Toshiba corporation. All rights reserved. - 614 -...

  • Page 115: Reset

    ATA-2 Notes: The default mode for write cache is “disable” after ATA-2. This is violation of ATA-2 specification. This setting can be changed by factory. Copyright © 2000 Toshiba corporation. All rights reserved. Table 10.12-1 Initialization of Task File registers...

  • Page 116: Master/Slave Configuration

    ATA / ATAPI specification. Jumper No Jumper C-D Jumper B-D Jumper B-D Jumper Prohibit A-B Jumper Prohibit A-C Jumper Copyright ©2000 Toshiba corporation. All rights reserved. - 616 - Drive Master Drive Slave Drive Master Drive HIGH Slave Drive Polarity key...

  • Page 117: Cache Memory

    If the next command is a write command, the data of the first block will be transferred without any delay. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 617 -...

  • Page 118: Protocol

    Host programmers should set command time-out periods enough long in order to avoid having effect on the device's ability to perform level retry and data recovery activities. Copyright ©2000 Toshiba corporation. All rights reserved. - 618 -...

  • Page 119: Pio Data In Commands

    INTRQ being asserted. In case of Read Multiple command, the host should complete transfer of a block of data which includes the sector with defective data. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 619 -...

  • Page 120: Pio Data Out Commands

    7) When the drive has finished processing ECC data , the drive clears the BSY bit and asserts INTRQ. 8) After detecting INTRQ, the host reads the Status register. The drive negates INTRQ in response to the Status register being read. Copyright ©2000 Toshiba corporation. All rights reserved. - 620 -...

  • Page 121: Non-Data Commands

    In response to the INTRQ, the host reads the Status register. f) The drive negates INTRQ in response to the Status register being read See each command description for error report protocol. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 621 -...

  • Page 122: Dma Data Transfer Commands

    The host resets the slave-DMA channel. i) After detecting INTRQ, the host reads the Status register. j) The drive negates INTRQ in response to the Status register being read. Copyright ©2000 Toshiba corporation. All rights reserved. - 622 -...

  • Page 123: Ultra Dma

    Ultra DMA Mode . The sender should not generate STROBE edges at less than the minimum period specified by the abled Ultra DMA Mode. A recipient should be able to receive data at the minimum period specified by the enabled Ultra DMA Mode. Copyright © 2000 Toshiba corporation. All rights reserved. 360014937 623 -...
  • Page 124 The generative polynomial for CRC is : The following figure shows an example of CRC generative logic ( ATA / ATAPI-5 ) Copyright ©2000 Toshiba corporation. All rights reserved. - 624 -...
  • Page 125 3) CRCOUT = 16-bit edge triggered result (current CRC) 4) CRCOUT(15:0) are sent on matching order bits of DD(15:0) 5) CRCIN = Output of combinatorial logic (next CRC) Copyright © 2000 Toshiba corporation. All rights reserved. CRCIN (15:0:) Edge Triggered...

  • Page 126: Other Timings

    From writing to command register to BSY=1 From BSY=1 to INTRQ set (When the drive is in standby mode) DMA DATA TRANSFER COMMANDS From writing to command register to BSY=1 Copyright ©2000 Toshiba corporation. All rights reserved. - 626 - Table 11.6-1 Other timings. Timeout...

This manual is also suitable for:

Hdd2155

Table of Contents