○ Operation timeout function
If no operation is made for one minute or more while the converter is in the setting mode, the
mode automatically returns to the measurement mode unless the parameters are displayed on
the screen.
Menu screen
Parameter check screen
Parameter change screen
(Parameters
changed.)
7.3.2 Setting and Calibration
In the setting mode, you can select items, or check or change the setting values as described below.
When you push
to move the digit, you can execute continuous operation by holding down the relevant
switch longer. (Holding down the switch longer automatically executes the operation continuously.)
● Moving to the menu screen
Switch operation
SET
A:DETECTOR
1 EXC CUR
2 SIZE
3 EXC FREQ
4 FLOW DIR
5 EXIT
ESC
EXC CUR
0.2000
ESC
EXC CUR
0.2000
are
being
or
to scroll up or down the numeric value or alphabet, or when push
Display example
PUSH SW
CNT:
CNT CTRL
SET:
SET MODE
SET
ESC
CNT
MENU SEL
BASIC
DETAILED
PREVIEW
ZERO ADJ
PLS SET
ESC
− 46 −
When no operation is made
for 1 minute, the mode
automatically returns to the
measurement mode.
A
The screen does not return
to the measurement mode.
A
Description
Mode change screen
Pushing
in the measurement mode
SET
takes you to the menu configuration
selection screen.
For
configuration,
select
DETAILED menu.
6 F 8 A 0 9 3 4
or
BASIC