Removing Condensation Buildup - LG LP1419IVSM Owner's Manual

Delay ON/OFF Timer
6
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is
on, set it to automatically turn off from 1 to
24 hours later.
NOTE
• Each press of the Timer button
advances the timer by 1 hour. After
the last press of the Delay OFF Timer
the display returns to the temperature
setting.
Temperature Control
7
To adjust the desired room temperature in Cool
or Dry mode. The desired room temperature
can be set between 60 °F–86 °F (16 °C–30 °C).
Press or arrows to increase or decrease
temperature setting.
NOTE
• Press and
the control panel for 3 seconds, the
temperature display can be switched
between degrees Fahrenheit (ºF) and
degrees Celsius (ºC).
Wi-Fi
8
Enables connection of the air conditioner to
the home Wi-Fi.
To connect Wi-Fi, press the Fan Speed
button on the control panel for 3 seconds.
Clean Filter
9
The Clean Filter LED lights up to notify you
that the filter needs to be cleaned. After
cleaning the filter, press Sleep button on
the control panel for 3 seconds to turn off
the Clean Filter light.
NOTE
• The filter reset must be done using the
control panel, not the remote control.
• This feature is a reminder to clean the
air filter for more efficient operation.
The LED light turns on after 250 hours
of operation.
Clear
10
Cancel Sleep and Timer settings.
NOTE
• Press the Clear button on remote
controller for 5 seconds, the Smart
Diagnosis function works.
18
button together on
NOTE
• Auto Restart : In case of turning off the air
conditioner due to power failure, your unit will
resume its last operation several minutes after
power is restored.
Removing Condensation
Buildup
Condensation can build up inside the unit when
the Cool and Dry modes are used. The fan can
be set to run for a short period after the product is
turned off to help keep the inside of the appliance
dry. This option is off by default.
Turning Condensation Fan On
1
Turn on the product, set it to Cool mode and
let it run for at least 10 seconds.
2
Press and hold the Auto Swing button for 3
seconds until On appears in the display.
3
The condensation fan is now turned on. When
the appliance is turned off, Co appears in the
display and the fan will continue to run for 10
minutes. The appliance will then shut down as
normal.
Turning Condensation Fan Off
1
When the product is powered ON, press and
hold the Auto Swing button for 3 seconds
until OF appears in the display.
2
The condensation fan is now turned off. The
appliance will shut down immediately when it
is turned off.
NOTE
• Some functions cannot be used while this
option is turned on.
• This option must be set using the control panel,
not the remote control.
EN