Sunrise Medical Quickie Q300 M Mini Instructions For Use Manual page 38

Fig. 8.7
Fig. 8.9
8.2.4 Removing the castor wheels (M base) (Fig.8.11).
• Use two 13mm spanners/sockets to undo the axle bolt.
• Remove the nyloc nut.
Refitting:
When refitting do not try to force the bolt through. Gently
move the wheel back and forth until the bolt slips through
then tighten to a torque of 14Nm.
WARNING!
Always use a new nyloc nut when refitting.
38
Fig. 8.8
Fig. 8.10
Fig. 8.11
Q300 M Mini Rev.E