Advertisement
Available languages
Available languages
Tare Operation (Cont.)
4. The weight of additional ingredients may be tared out as well. For
example, if a recipe calls for ½ lb rice and ½ lb beans, place the
rice into the bowl. Once the correct amount of rice is weighed,
press the "ON/OFF/TARE" button. A running zeros pattern (0000)
shows, then zero. Add the ½ lbs of beans. Both ingredients have
been accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a
negative number when the items are removed from the scale.
To reset the scale back to zero for a new measurement, press the
"ON/OFF/TARE" button. A running zeros pattern (0000) shows, then
the scale resets to zero.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove
stains, use a mild soap. Never use detergents, excess water, treated
cloths, harsh cleaning agents, or sprays. Avoid contact with acids,
such as citrus juices.
2. Do not tamper with the scale's internal components. Doing so will
invalidate the warranty on this unit and may cause damage. The
scale contains no user-serviceable parts
3. Although your scale is designed to be maintenance-free, it contains
sensitive electronic parts. Avoid rough treatment. Treat it with care
to ensure the best performance.
4. This scale is intended for home/consumer use only. It is not intended
for commercial or medical use.
5. This scale is designed to read weights up to 11 lbs/5 kgs. To prevent
damage, do not place more than 11 lbs/5 kgs on it.
6. Do not store scale where you store cleaning chemicals. The
vapors from some household products may affect the electronic
components of your scale. Do not store scale on its side.
7. This scale is an extremely sensitive weighing device. In order to
prevent run down of the battery, do not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak.
Do not mix old and new batteries. Do not mix Alkaline, carbon-zinc
(standard) or Nickel-Cadmium (rechargeable) batteries. Remove
the batteries if the scale will not be used for a long period of time.
9. Overload Warning: Should "oL" appear on the display during a
weighing, this indicates that the maximum weighing capacity of
the scale has been exceeded. Remove the weight immediately;
otherwise, permanent damage could occur.
3
Advertisement
