Advertisement
Quick Links
STOWAWAY BENCH
I N ST R U C T I O N S
ASSEMBLY
STEP 1. Slide the Front Panel into the slot on the Front Leg and the
Rear Panel into the slot on the Rear Leg, then use (4) 3" Screws to
fasten the panels to the Left Leg Assembly.
HARDWARE PACK
BENCH PARTS BOX 1
• BACK ASSEMBLY
• FRONT PANEL
• REAR PANEL
• BOTTOM PANEL
• SEAT LID
• HARDWARE PACK
BENCH PARTS BOX 2
• LEFT LEG ASSEMBLY
• RIGHT LEG ASSEMBLY
SUGGESTED TOOLS
• RUBBER MALLET
• PHILLIPS HEAD SCREWDRIVER
• DRILL
LEFT ARM
LEFT ARM
ASSEMBLY
ASSEMBLY
NOTE: TWO PEOPLE ARE RECOMMENDED FOR ASSEMBLY
3" SCREW
3" SCREW
MUST BE ASSEMBLED ON A FLAT SURFACE TO
KEEP PANELS UPRIGHT WHEN ASSEMBLING
(10) 3" SCREWS
(4) 1.5" BARREL BOLTS
(1) SQUARE-HEAD BIT
(1) ALLEN WRENCH
Advertisement
Summary of Contents for Nags Head Hammocks STOWAWAY
- Page 1 STOWAWAY BENCH HARDWARE PACK I N ST R U C T I O N S (10) 3” SCREWS (4) 1.5” BARREL BOLTS (1) SQUARE-HEAD BIT (1) ALLEN WRENCH BENCH PARTS BOX 1 • BACK ASSEMBLY • FRONT PANEL • REAR PANEL •...
- Page 2 3” SCREW Congratulations on purchasing this Durawood Stowaway Bench. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641. RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking, peeling, chipping, insect infestation or other damage should ever occur, The Hammock Source will replace this furniture, at no charge to you.