Connecting External Device - Wired & Non Wired - Sharp EQ Series Operating Instructions Manual

CONNECTING EXTERNAL DEVICES - WIRED
Before turning your set on, it is recommended that your external devices are connected before continuing with
the fi rst-time installation process. Depending on the source connectivity on your television, follow the guidance
below when connecting external devices.
HDMI Connection
For optimum picture quality, we recommend connecting your device to the television using an HDMI cable.
HDMI
External Device
A
HDMI cable (not supplied)*
B
*Be sure to use an authorised HIGH-SPEED HDMI cable bearing the HDMI logo.
HDMI CEC-Compatible Devices
If an HDMI CEC-compatible device (e.g., Blu-ray player, AV receiver) is connected with an HDMI cable, you can
operate the device with the televisions remote control. We recommend using the HDMI (ARC) connection when
used with an AV receiver – please refer to the ARC section of this Operation Manual.
Adjusting HDMI CEC Settings
1. Turn on the connected device.
2. To enable HDMI control, press the [HOME] button, then select Settings > Device Preferences >
Inputs.
3. Activate HDMI control on the connected device.
Available options
HDMI control
Device auto power off
Television auto power
on
CEC Device list
Allow the TV to control HDMI devices.
If disabled, the connected device does not turn off automatically when
the television is turned off .
If disabled, the television does not turn on automatically when the
connected device is turned on.
Displays the HDMI CEC device list.
B
Getting Started
A
HDMI
9 9