Typical Unit Wiring Diagrams - Carrier WeatherMaker 50FC-16 Series Installation Instructions Manual

5. The Thermidistat has dry contacts at terminals D1 and
D2for dehumidification operation (see Fig. 41). Connect D1
to the R terminal on the UCB. Connect D2 to the HUM ter-
minal on the UCB. Refer to the installation instructions
included with the Carrier Edge
more information.
Fig. 41 — 50FC-*16 Unit with Humidi-MiZer Adaptive Dehumidification System with
Pro Thermidistat device for
®
PROGRAMMABLE
THERMOSTAT
Rc
Rh
W1
G
Y2
C
O/W2/B
Y1
OAT
RRS
SRTN
HUM
D1
D2
V+
Vg
Edge ® Pro Thermidistat Device

TYPICAL UNIT WIRING DIAGRAMS

See Fig. 42 - 45 for examples of typical unit control and power
wiring diagrams. These wiring diagrams are mounted on the in-
side of the unit control box. Refer to the wiring diagrams in the
unit control box when making field power wiring connections.
UNIT CONTROL BOARD
THERMOSTAT CONNECTIONS
C
HUM
G
W2
W1
Y2
Y1
R
20