Pixel Mapping - Olympus CAMEDIA C-300 ZOOM Manual

Pixel mapping

The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing circuit automatically.
It is not necessary to operate this function frequently. Approximately once a
year is recommended. Wait a few minutes after the monitor is used or
continuous shots are taken to allow for proper performance of the Pixel
Mapping function.
1
Display the top menu in the shooting
mode.
• Open the lens barrier fully.
• Press
2
Press
3
Press
tab, then press
4
Press
PIXEL MAPPING, then press
6
5
Press
A bar is displayed showing the progress of
pixel mapping. When pixel mapping is
finished, the camera returns to the mode
menu.
• If you accidentally turn the camera off during pixel mapping, start
• Do not remove the batteries or disconnect the AC adapter while pixel
116
.
to select MODE MENU.
to select the SETUP
.
to select
.
again from Step 1.
mapping is in progress as this may cause a malfunction.
ALL RESEt
REC VIEW
FILE NAME
PIXEL MAPPING
.
ALL RESEt
REC VIEW
FILE NAME
PIXEL MAPPING
StARt