Advertisement
Quick Links
Advertisement
Summary of Contents for NANLITE WC-USBC-C1
- Page 1 WC-USBC-C1 USER MANUAL Guangdong NanGuang Photo&Video Systems Co., Ltd...
-
Page 2: Product Diagram
WC-USBC-C1 Wire Controller Product Diagram Power switch Display Hand strap hole + - buttton USB Type-C connector MODE button SWITCH button USB Type-C port WC-USBC-C1 wire controller is compatible with PavoBulb 10C and PavoTube T8-7X. - Page 3 Usage 1. Connect the wire controller to the fixture, then toggle the power switch to turn on the wire controller, the "NANLITE" logo will be displayed on start up. MODE SWITCH MODE SWITCH...
- Page 4 2. When the wire controller is connected to the fixture, the wire controller will first read the information of the fixture, including the address and fixture model. ① When the wire controller is not connected to the fixture, the display will show "Disconnected" (As shown in figure 1); ②...
- Page 5 4. SWITCH button: For switching corresponding options under different light modes, or to switch the channel, language, DMX mode, DMX pixel (only for PavoTube T8-7X), wireless protocol (only for PavoBulb 10C), Bluetooth reset, firmware update and version under the menu options. DIM: 100% DIM: 100% HUE: 000 SAT: 100...
- Page 6 6. Press MODE button to enter the menu. MENU CH: 512 LANGUAGE: MODE SWITCH ① Channel (address code) setting MENU MENU CH: 512 LANGUAGE: LANGUAGE: ENG MODE SWITCH Press SWITCH button to CH.
- Page 7 MENU MENU LANGUAGE: ENG LANGUAGE: ENG MODE SWITCH Press + - button to adjust the value of the address code. ② Language setting MENU MENU CH: 512 LANGUAGE: ENG LANGUAGE: MODE SWITCH Press SWITCH button to LANGUAGE.
- Page 8 MENU 菜单 CH: 512 通道：512 LANGUAGE: 语言：中文 MODE SWITCH Press + - button to select Chinese or English. ③ DMX mode setting MENU MENU CH: 512 DMX MODE: CCT 8bit LANGUAGE: DMX PIEXL: 01 MODE SWITCH Press SWITCH button to DMX MODE.
- Page 9 MENU MENU DMX MODE: CCT 8bit DMX MODE: CCT 16bit DMX PIEXL: 01 DMX PIEXL: 01 MODE SWITCH Press + - button to select the desired DMX mode. ④ DMX PIXEL setting (Note: Only controllable with PavoTube T8-7X.) MENU MENU DMX MODE: CCT 16bit DMX MODE: CCT 16bit...
- Page 10 MENU MENU DMX MODE: CCT 16bit DMX MODE: CCT 16bit DMX PIEXL: DMX PIEXL: MODE SWITCH Press + - button to adjust the number of DMX pixels. ⑤ Wireless protocol setting (Note: Only controllable with PavoBulb 10C.) MENU MENU DMX MODE: CCT 16bit WIRELESS PROTOCOL: V1.0 DMX PIEXL:...
- Page 11 MENU MENU WIRELESS PROTOCOL: V1.0 WIRELESS PROTOCOL: V2.0 BT: RESET BT: RESET MODE SWITCH Press + - button to select V1.0 or V2.0. ⑥ Bluetooth Reset MENU MENU WIRELESS PROTOCOL: V2.0 WIRELESS PROTOCOL: V2.0 BT: RESET RESET MODE SWITCH Press SWITCH button to BT.
- Page 12 MENU BT RESET WIRELESS PROTOCOL: V2.0 BACK RESET RESET MODE SWITCH Press + - button to enter the interface of bluetooth reset. BT RESET BT RESET BACK RESET BACK RESET MODE SWITCH Press SWITCH button to RESET.
- Page 13 MENU BT RESET WIRELESS PROTOCOL: V2.0 BACK RESET RESET MODE SWITCH Press MODE button to confirm reset and it will return to the menu interface after resetting the bluetooth. ⑦ Firmware update (1)Firmare update for the wire controller Switch off the the wire controller, and then insert the USB flash drive with the new firmware for wire controller, the screen will show as below: FOUND FIRMWARE FOUND FIRMWARE...
- Page 14 FOUND FIRMWARE FIRMWARE UPDATING V1.00.10 FIRMWARE UPDATED ..BACK UPDATE MODE SWITCH Press MODE button to confirm the update, it will prompt "FIRMWARE UPDATED" after the firmware is upgraded. (2)Firmware update for fixtures via wire controller Switch on the controller and connect it to the fixture to be upgraded, insert the USB flash drive with the new firmware of the fixture, turn on the fixture, then press the MODE button to switch to the menu interface.
- Page 15 MENU FOUND FIRMWARE SEARCHING FOR UPDATE PavoBulb_10C_FW FIRMWARE FILE ..VERSION：V1.00.10 BACK UPDATE MODE SWITCH Press + - button to enter the firmware update interface. FOUND FIRMWARE FOUND FIRMWARE PavoBulb_10C_FW PavoBulb_10C_FW BACK UPDATE BACK UPDATE MODE SWITCH Press SWITCH button to UPDATE.
-
Page 16: Firmware Updating
FOUND FIRMWARE FIRMWARE UPDATING FIRMWARE UPDATED PavoBulb_10C_FW ..BACK UPDATE MODE SWITCH Press MODE button to confirm the update, it will prompt "FIRMWARE UPDATED" after the firmware is upgraded. ⑧ Version MENU MENU UPDATE FW: UPDATE VERSION: V1.00.10 VERSION: V1.00.10... - Page 17 " and icon is scrolling; when the battery is fully charged, the display shows " ". This manual has been compiled according to the rigorous testing of our company's products. Product designs are subject to change without prior notice. You can download the latest version of the manual for this particular product from www.nanlite.com.
- Page 18 Version: V2 2022-02-16 +86-754-85751187 +86-754-85300887 service@nanlite.com Zhanglin,324,Dongli Chenghai Shantou Guangdong China www.nanlite.com...