safety glasses and be kept at a safe IMPORTANT! distance from the work area. It is essential that you read the instructions ■ Ensure that the safety devices are in good in this manual before assembling, operating, working condition. Make sure that all safety and maintaining the product.
ELECTRICAL SAFETY WARNINGS be cleaned of debris, toys, outdoor furniture, or other objects that could create a hazard. ■ The plug must match the outlet. Never modify the plug in any way. Unmodified ■ Never pick up or carry the product while the plugs and matching outlets reduce the risk motor is running.
15 minutes, and ■ Regularly inspect and maintain the high reconnect the product to the power supply. pressure cleaner for safe operation. RYOBI recommends inspecting the product every TRANSPORTATION AND STORAGE 6 months. CAUTION! Mind the weight of the product ■...
19. RYOBI detergent 20. Garden hose connector Maximum pressure 21. Turbo lance 22. Detergent bottle NOTE: If using a detergent, refer to the Material Safety Data Sheet of the detergent. Turn the bottom portion of the nozzle all the way to the right to...
TROUBLESHOOTING Problem Possible causes Solution Fluctuating pressure Pump sucking air Check that hoses and connections are air tight. Dirty, worn-out, or stuck Bring the product to an valves authorised service centre for service or repair. Worn-out pump seals Bring the product to an authorised service centre for service or repair.
Rated pressure 8 MPa (80 bar) NOTE: Check the specification of the accessory part if it Degree of protection IPX5 matches the specifications of the RYOBI high pressure Rated flow 5.5 L/min cleaner. Maximum flow 6.5 L/min WARNING! The declared vibration total values...
Page 19
For servicing, the product must be sent or presented to a RYOBI authorised BS EN 60335-1:2012+A2:2019, BS EN 60335-2-79:2012, service station listed for each country in the following list of service station BS EN 55014-1:2017+ A11: 2020, BS EN 55014-2:2015, addresses.