What's In The Box; Parts; Connecting The Wireless Interface 2 To The Indoor Unit - Mitsubishi Electric PAC-USWHS002-WF-2 Installation Instructions Manual

Mitsubishi Electric's Wireless Interface 2 is designed for communication to
Mitsubishi Electric's kumo cloud
connect to Mitsubishi Electric's kumo cloud
for any
(i) underperformance of a system or any product,
(ii) system or product fault, or
(iii) loss or damage to any system or product, which is caused by or arises
from connection to and/or use of any third-party Wireless Interface 2 or any
third-party wireless or Wi-Fi service with Mitsubishi Electric equipment.

3. What's in the Box

• Wireless Interface 2 with two removable plugs for optional connections
• Connecting cable
• Velcro strips (2)
• Product insert

4. Parts

Wireless Interface 2

5. Connecting the Wireless Interface 2 to the Indoor Unit

1. Power down the entire system.
2. Plug one end of the connecting cable into the white connector on the Wireless
Interface 2.
3. Disassemble the necessary indoor unit components, locate the CN105
connector on the indoor unit control board, and plug in the other end of the
connecting cable.
4. Select an empty spot in or around the indoor unit to mount the Wireless
Interface 2, then attach one Velcro strip to the device, and one to the desired
mounting location. Align the Velcro strips and press down firmly to create a
secure attachment.
5. Start up: Refer to the kumo cloud
the manual:
(i) Go to mylinkdrive.com
(ii) Select the required product market.
(iii) Click Controls and go to the kumo
cloud section.
(iv) Under kumo cloud Devices, click
PAC-USWHS002-WF-2 and then
click Technician Manual.
Specifications are subject to change without notice.
. Third-party Wireless Interface 2 devices cannot
®
. Mitsubishi Electric is not responsible
®
Technician Manual for the installer. To view
®
5
PAC-USWHS002-WF-2
© 2021 Mitsubishi Electric US, Inc
.