Sony TRINITRON PVM-14N5A Service Manual page 27

Using On-Screen Menus
To change the item selection menus
Select NEXT PAGE on the menu to display next item
selection menu and PREVIOUS PAGE on the menu to
display the previous item selection menu.
MENU 1 MENU 2
: When selecting NEXT PAGE
:
When selecting PREVIOUS PAGE
How to change the item selection menu
To return to the item selection menu from the
adjustment and setting menus
Press the MENU/EXIT (1) button on the currently
displayed adjustment and setting menu.
To close the menu (to return to the regular
screen)
Press the MENU/EXIT (1) button when the item
selection menu is displayed. The on-screen menu
disappears and the regular screen appears.
Using the Last Control Function
If you press the > or . button when the menu is not
displayed, one of the following menu items that you
adjusted last time is displayed.
• VOLUME
• CONTRAST
• BRIGHTNESS
• CHROMA
• PHASE
Then you can adjust the item immediately.
10
Functions of On-Screen Menus
Item selection menus
1 MENU 1
MENU 1 menu has the following selection items.
Item Functions
VOLUME To obtain the desired volume
CONTRAST To adjust the contrast
BRIGHTNESS To adjust the brightness
CHROMA To adjust the color intensity
To adjust the phase
PHASE
2 MENU 2
MENU 2 menu has the following selection items.
Item Function
COLOR SELECT To select the color system of the
input signal
DISPLAY To select period of display
To select the menu language
LANGUAGE
USER MEMORY To store and recall the values and
settings adjusted by a user, and recall
the factory-settings
Adjustment and setting menu
1a VOLUME menu (Factory setting: 50)
Adjust the speaker volume.
The volume increases by pressing the > button.
The volume decreases by pressing . button.
1b CONTRAST menu (Factory setting: 80)
Adjust the contrast of the screen.
The contrast becomes higher by pressing the > button.
The contrast becomes lower by pressing . button.
1c BRIGHTNESS menu (Factory setting: STD)
Adjust the brightness of the screen.
The screen becomes brighter by pressing the > button.
The screen becomes darker by pressing . button.
1d CHROMA menu (Factory setting: STD)
Adjust the color intensity of the video signal.
The color intensity strengthens by pressing the >
button.
The color intensity weakens by pressing . button.
1e PHASE menu (Factory setting: STD)
Adjust the phase of the video signals.
The skin tone becomes greenish by pressing the >
button.
The skin tone becomes purplish by pressing the .
button.
Note
The phase of an NTSC composite video signal or a
Y/C separate signal can be corrected on this menu. The
PAL composite video signal or a Y/C separate signal
cannot be corrected.
2a COLOR SELECT menu
(Factory setting: AUTO)
Select the color system of the input signal.
AUTO: Input color systems are automatically
selected. When you input NTSC signal, comb filter
will activate. To monitor NTSC signal with trap
filter, select NTSC in this menu.
The factory setting of the COLOR SELECT menu
depends on destination.
SSM-14N5U/20N5U: NTSC
SSM-14N5E/20N5E/14N5A/20N5A: PAL
2b DISPLAY menu
(Factory setting: SHORT TIME)
Select the period of displaying the color system of the
current input signals.
The items have the following functions.
Item Function
SHORT TIME To display the kind of color system
being used for several seconds on the
screen each time you change the
signal input.
LONG TIME To display the kind of color system
being used for approximately five
minutes on the screen each time you
change the signal input.
OFF Not to display the kind of the color
system.
2c LANGUAGE menu
(Factory setting: ENGLISH)
Select the menu language among the five languages,
English, German, French, Italian and Spanish.
11