Sony Glasstron PLM-A35 Operating Instructions Manual page 14

Connecting the Glasstron (continued)
If your video equipment has an S video jack
We recommend connecting the Glasstron to your video equipment using an S video cable and the
audio/video cable to enjoy the highest quality pictures. In this case, you do not need to connect the
video (yellow) plug. If you connect both the S video and video plugs, the S video signal is
automatically selected.
Power supply box
A/V IN S VIDEO IN
: Signal flow
Notes
• Even if you use the supplied audio/video
cable, the audio and video signals may not be
carried to the Glasstron depending on the
video source. In this case, contact your Sony
dealer or local authorized Sony service
facility.
14
-GB
to S VIDEO IN
to A/V IN
Audio/video cable
(special miniplug y special
miniplug) (not supplied)
Audio/video cable
(special miniplug y phono
plug) (supplied)
VCR, laser disc player, DVD player,
camcorder, etc.
S video cable
(not supplied)
to audio/video output
• When you connect the Glasstron to the audio
output jacks (phono jacks) of your video
equipment, connect the Glasstron to both the
right and left audio output jacks. If you
connect the Glasstron to just one audio output
jack, you will hear sound from only one of the
stereo earphones.
to S video output
Video (yellow)
Audio L (white)
Audio R (red)
to audio/video outputs