Sony WEGA KP-FX432 Operating Instructions Manual page 28

Enjoying stereo or bilingual programs (continued)
When receiving an A2 (German) program
Receiving area for NICAM and A2 (German) programs
If the sound is distorted or noisy when receiving a monaural
program through the 8 (antenna) terminal
28
Advanced Operations
Broadcasting
A2 (German) stereo
A2 (German) bilingual
System
NICAM
A2 (German)
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
"Mono". The sound becomes monaural, but the noise is reduced.
• Before receiving a NICAM stereo program in China, please check the
NICAM broadcast condition at your area. When receiving a NICAM
stereo program, the receiving conditions might vary depending on area. In
addition, different strength of the NICAM broadcast signal might affect
the receiving quality.
Press A/B repeatedly until "Mono" appears on the screen.
To cancel the monaural sound setting, press A/B again until "Auto"
appears on the screen.
Mono
Notes
• The "Mono" or "Auto" setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when the projection TV is in
the "Mono" setting. Normally, set the projection TV to "Auto".
On-screen display (Selected sound)
Mono
(Regular sound)
Main
(Main sound)
Receiving area
Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
Australia, Malaysia, Thailand, etc.
Auto
Stereo
(Stereo sound)
Sub
(Sub sound)