Advertisement
5.
Procedure for connection
I Connecting the universal cable assembly
To connect the universal cable assembly and the probe header, connect the two 34-pin connectors of
the universal cable assembly and the two 34-pin connectors on the probe header.
• The connectors on the universal cable assembly, and the mounting section of the connectors on the
probe header are marked "A" and "B" to distinguish the connections. Correctly connect connector
A of the universal cable assembly to connector A on the probe header, and connector B of the
universal cable assembly to connector B on the probe header.
Connection to
the emulator probe connector
Connect connector A of the universal
cable assembly to connector A on
the probe header and connector B
of the universal cable assembly to
connector B on the probe header.
Figure 3 Connecting the universal cable assembly and the probe header
4
Universal cable assembly
(MB2144-210A: sold separately)
Probe header
(MB2144-227-01)
Advertisement
