Master A2 User Manual page 27

ASSEMBLY INSTRUCTION FOR THE 2 UNIT OUTDOOR PLAYGYM
Reserve holes in order to
assemble the slide here
A. Connect Strengthen the Slice (A) (4), Strengthen the Slice (B) (5) and top support bar with Hex Bolt (A4),
M8 Nylon Washer (X2), M8 Safety Nut (U2) and plug gym set leg (2) into the gate of Strengthen the Slice
(A) and Strengthen the Slice (B) for both side. Connect gym set leg (2) and Strengthen the Slice (B) (5) with
Hex Bolt (A3), M8 Nylon Washer (X2), M8 Safety Nut (U2) for both side.
B. Connect side girt (3) to gym set leg (2) using Hex Bolt (B4), M6 Nylon Washer (X1), M6 Safety Nut (U1) for
both side.
27
EN