Using Push To Talk - Kyocera KX444 User Manual

2 U P
SING USH TO
The Push to Talk (PTT) feature on your Kyocera
KX444 phone allows you to use your phone like a
walkie-talkie to communicate with another
individual with Verizon Wireless PTT service.
Simply select a contact, then press and hold your
phone's Push to Talk (PTT) button to speak.
On a PTT call, only one person can speak at
Tip:
a time. Once you have finished speaking,
release the PTT button and listen for the other
party to reply.
Phone position
For best results when using the PTT feature, hold
the phone facing you with the mouthpiece at least
one inch (2.5 cm) away from your mouth.
Speakerphone
PTT calls come through the speakerphone
by default.
If a headset is connected to the phone, PTT
Note:
calls will come through the headset speaker, and
you speak through the headset microphone. You
are required to press the PTT button to gain floor
control of a PTT call and speak. (Headsets are
sold separately.)
6
All manuals and user guides at all-guides.com
T
ALK
Icons at the top of the phone screen indicate
whether the speakerphone is on.
.
The speakerphone is on. Press the
speakerphone button on the top of the
phone to turn it off.
The speakerphone is off. Calls will come
through the earpiece. Press the
speakerphone button to turn it on.
Adjusting PTT call volume
•
To adjust speakerphone volume while on a
Press the volume key on the left side
PTT call—
of the phone up or down during the call.
•
To make PTT calls come through the
Press the speakerphone button
earpiece—
before or during a call.
To cancel, press the speakerphone button.
•
To make PTT calls come through the earpiece
and silence ringers—
→
select
Menu Settings
select a vibrate or lights setting.
To cancel, either press the speakerphone
button or select
Menu
→
Mode Norm. Sounds.
From the home screen,
→
and
Silent Mode
→ →
Settings Silent

Using Push to Talk