D-Link DWL-8610AP Quick Installation Manual page 4

Dual-band 802.11n/ac unified wireless access point

Hide thumbs Also See for DWL-8610AP:

Table of Contents

Available languages

You may power the access point using one of the following methods:

1. Connect the access point to the supplied power adapter (12V / 2A).

2. Purchase separately an external power-over-Ethernet (POE) switch (PoE 802.3at), or a PoE injector.

You may configure the access point using one of the following methods:

1. Directly connect the access point to a computer. You may then configure the access point through its

graphical user interface (GUI).

2. Connect the access point to your computer using the included console cable. You may then configure the

access point through its command line interface (CLI).

Mounting Plate Assembly

Step 1. Insert the provided wall anchors in the wall where the mounting plate will be attached.

Step 2. Use the provided screws to secure the mounting plate on the wall.

Table of Contents