Dell Latitude 9330 Service Manual page 34

Steps
1. Remove the two (M2x2.5) screws that secure the display-cable bracket and remove the display-cable bracket from the
computer.
2. Peel back the camera cable from the system board and disconnect the camera cable.
3. Using the pull tab, disconnect the display cable and camera cable from the connector on the system board.
4. Remove the display and camera cables from the routing guides on the palm-rest and keyboard assembly.
5. Remove the two (M2.5x3) screws from the left hinge and fold back the left hinge.
34 Removing and installing components