Table of Contents
Advertisement
To perform each adjustment, display the adjustment menu by
selecting the desired menu from "Camera Adjust," "Video Adjust,"
"LCD Adjust" or "EVF Adjust" and select each adjustmentitem.
Note:
The adjustment data is stored to the EEPROM IC after each adjustment.
7. After adjustment, to end the software, select "Exit" in File menu or
close the window.
6.4. INITIAL GUIDELINE
The table below shows which adjustments are necessary according to the unit parts and
individual parts to be replaced.
Make sure to perform these adjustments shown below as necessary.
Fig. E5-4
Fig. E5-6
37
Advertisement
Table of Contents
