Casio 2184 User Manual

Module No. 2184
A B
C D
L
• If the digital display of your watch is continuously changing, see
"To turn off Auto Display" for information on how to stop it.
• Press C to change from mode to mode.
• In any mode, press L to illuminate the display.
Timekeeping Mode
A B
C D
L
TIMEKEEPING
Month – Day
Year
Day of week
A B
C D
Hour : Minutes
PM indicator
Seconds
To set the time and date
A B
C D
Seconds
Day
Month
• See "Daylight Saving Time (DST)" for details on the DST setting.
3. While a setting is flashing, use D (+) and B (–) to change it.
• When the 12/24-hour setting is selected, press D to toggle
12H
between 12-hour (
4. Press A to exit the setting screen.
Daylight Saving Time (DST)
Daylight Saving Time automatically advances the time setting by one
hour from Standard Time. Remember that the not all countries or even
local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard
Time
A B
C D
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and
technical information can be found in the "REFERENCE" section.
World Time Mode
Press C.
Use the Timekeeping Mode to set and view
the current time and date.
To reset the seconds count to zero
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press D to reset the seconds count to
• Pressing D while the seconds count is
in the range of 30 to 59 resets the
seconds to 00 and adds 1 to the
minutes. In the range of 00 to 29, the
minutes count is unchanged.
3. Press A to exit the setting screen.
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press C to move the flashing in the
sequence shown below to select other
settings.
DST Hour Minutes
12/24-Hour
Year
Format
24H
) and 24-hour ( ) timekeeping.
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
2. Press C to move the flashing to the DST
On/Off setting.
3. Press D to toggle between Daylight Saving
Time ( ON ) and standard time (
4. Press A to exit the setting screen.
• The DST indicator appears on the display
to indicate that daylight saving time is
turned on.
ABOUT THIS MANUAL

GENERAL GUIDE

GMT differential
Timekeeping Mode time
A
00 .
C
Current time in the
selected city code
To view the time in another zone
While in the World Time Mode, press D to scroll forward through the
city codes (time zones) and B to scroll back.
To set the World Time
A
C
3. Press C to move the flashing in the sequence shown below to select
other settings.
• While the hour or minutes setting is selected (flashing), use D (+)
and B (–) to change it.
• While DST setting is selected (flashing), press D to toggle between
Daylight Saving Time (
4. Press A to exit the setting screen.
To toggle a time zone between standard time and Daylight Saving
Time
1. In the World Time Mode, use B and D to display the city code (time
zone) whose standard time/Daylight Saving Time setting you want to
change.
• Note that you cannot switch between standard time and Daylight
Saving Time while
OFF ).
2. Hold down A until the DST On/Off setting starts to flash on the display.
3. Press D to toggle between Daylight Saving Time (
time (
4. Press A to exit the setting screen.
• The DST indicator is on the display whenever you display a city
code for which Daylight Saving Time is turned on.
Data Bank Mode
Countdown Alarm Mode

WORLD TIME

The World Time Mode shows you the current
time in 27 cities (29 time zones) around the
world.
• For full information on city codes, see the
City code
"CITY CODE TABLE" at the back of this
manual.
B
• The time settings of the Timekeeping Mode
and the World Time Mode are independent
from each other, so you must make
D
separate settings for each.
• Whenever you change the time setting for
any city in the World Time Mode, the settings
of all other cities are changed accordingly.
• World Time functions are available in the
World Time Mode, which you can enter
using C.
1. In the World Time Mode, use B and D to
B
scroll through the city codes (time zones)
and find the one you want.
2. Hold down A until the DST On/Off setting
starts to flash, which indicates the setting
D
screen.
DST
Hour
) and standard time (
ON
GMT
is selected as the city code.
OFF ).
2184-1
Alarm Mode
Stopwatch Mode
Minutes
).
OFF
) and standard
ON