Projector Control - Sony VPL-CX10 Quick Start Reference Sheet

This document describes the SmartPanel Projector Driver for the Sony VPL-CX10 projector. It should
also work with the VPL-CS10. For general information on configuring and using the Panel, see the
SmartPanel Configuration and Installation Guide.
I. PROJECTOR CONTROL
A. Volume and Power Control
Volume control on the Sony is relative. Absolute volume control is possible with use of SP Controls'
optional Audio Follow Video Pre-Amplifier.
B. Input Selection Mapping
The following table specifies the factory preset input mapping for this Driver. The Configuration Utility
can be used to customize these settings your installation.
VIDEO
Selection 1:
Selection 2: VIDEO
Selection 3: S-VIDEO
Selection 4: INPUT A (RGB)
Input choices available for this Driver are VIDEO,
S-VIDEO, and INPUT A (RGB).
C. Hidden Function Mapping
The following table specifies the factory preset hidden function mapping for this Driver. The
Configuration Utility can be used to customize these settings your installation.
Selection 1: PIC MUTE
Selection 2: ENTER
Selection 3: ADJUST LEFT
Selection 4: ADJUST RIGHT
Off: MENU
Volume Up: ADJUST UP
Volume Down: ADJUST DOWN
Hidden functions names are based on the Sony
remote and the controls on top of the projector.
Hidden functions are accessed by pressing the indicated key while the holding the On key down.
Menu summons onscreen menus. Adjust keys move through menus. Enter accepts changes. Pic Mute is
a toggling video mute.
Digital Zoom command allows zooming into RGB images only. While zoomed, the Adjust keys may be
used to pan the zoom window up, down, left and right.
DR-SNY03 - 8/30/01 SP Controls reserves the right to modify specifications without notice at any time.
Projector Driver Application Note
S-VIDEO
VIDEO VIDEO
ADJUST
ENTER
PIC MUTE
LEFT
Sony VPL-CX10
Revision A
INPUT A
Projector Volume
ON ON ON ON
Ready
Warm-up
OFF OFF
OFF OFF
ADJUST ADJUST
RIGHT UP
Projector Volume
ON ON ON ON
Ready
Warm-up
OFF OFF
OFF OFF
ADJUST
MENU
DOWN