Sony MD Walkman MZ-R55 Operating Instructions Manual page 58

Press + when inputting alphabet,
symbol or numbers to change the letter
to the one before/next one. Press =
to go back.
Press DISPLAY to insert a blank space
to type in a new letter.
Press MODE to delete a letter and
move back all following letters to the
left.
Press p or T MARK to cancel labeling.
5 Repeat step 4 and enter all characters
of the label name.
6 Press EDIT/ENTER.
The track or disc is labeled.
Labeling a track during playback
1 Insert a disc and play the track you
want to label.
2 Press EDIT/ENTER.
" : Name" flashes in the display.
3 Press EDIT/ENTER again.
Follow steps 4 to 6 of "Labeling a disc
4
during stop" above.
Labeling a track or a disc during
recording
1 Press EDIT/ENTER during recording.
" : Name" flashes in the display.
2 To label a track, press EDIT/ENTER
again.
To label a disc, press = or +
repeatedly until "
in the display, then press EDIT/
ENTER.
Follow steps 4 to 6 of "Labeling a disc
3
during stop" above.
When the recording is stopped while
labeling a track or a disc during recording,
or when the playback moves on to the next
track while labeling a track during
playback, the input at that point is entered
automatically.
58
: Name" flashes
Labeling on the remote control
Labeling a disc during stop
Insert a disc.
1
To label a disc that is already in the
recorder, press p to stop.
2 Press DISPLAY for 2 seconds or
longer.
" : Name" flashes in the display.
Press p.
3
The disc is ready to be labeled.
4 Turn the control to select a letter and
press p to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press p to switch between katakana,
the alphabet, and symbols/numbers.
Press VOLUME +/– to move the
cursor to left or right.
Turn the control to (• + when
inputting alphabet, symbol or numbers
to change the letter to the one before/
next one. Turn to = to go back.
Press DISPLAY to insert a blank space
to type in a new letter.
Press PLAY MODE to delete a letter
and move back all following letters to
the left.
Press TRACK MARK to cancel
labeling.
5 Repeat step 4 and enter all characters
of the label name.
6 Keep pressing p for 2 seconds or
longer.
The track or disc is labeled.
Labeling a track during playback
1 Insert a disc and play the track you
want to label.
2 Press DISPLAY for 2 seconds or
longer..
" : Name" flashes in the display.
Press p.
3
The disc is ready to be labeled.
4 Follow steps 4 to 6 of "Labeling a disc
during stop" above.enter the selected
character.