Advertisement
Quick Installation Guide
ROMED6U-2L2T
5
Install the Processor and Heatsink
Locate the three torx screws on the CPU socket and
unscrew them according to the order A→B→C. Open
the first retention cover.
1
2
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
6
Install the PCIE Card
1
Remove the bracket facing the slot that
you intend to use. Keep the screw for
later use.
2
A lig n t he ca rd connec tor w it h t he
slot and press firmly until the card is
completely seated on the slot.
3
Fasten the card to the chassis with the
screw.
8
LAN Port LED Indications
IPMI LAN Port
Activity / Link LED
Status
Description
ACT/LINK LED
Off
No Link
SPEED LED
Blinking Yellow
Data Activity
On
Link
LAN Port
1G LAN Port (LAN3, LAN4) LED Indications
Activity / Link LED
LAN Port
Status
Description
Off
No Link
ACT/LINK LED
SPEED LED
Blinking Green
Data Activity
On
Link
10G LAN Port (LAN1, LAN2) LED Indications
LAN Port
Activity / Link LED
Status
Description
Off
No Link
ACT/LINK LED
SPEED LED
Blinking Yellow
Data Activity
On
Link
10
Panel Headers
System Panel
PLED+
PLED-
PWRBTN#
GND
1
GND
RESET#
GND
HDLED-
HDLED+
Open the second bracket. Take out the internal
plastic cover.
3
4
Speed LED
Status
Description
Off
10M bps connection or no
link
Yellow
100M bps connection
Green
1Gbps connection
Speed LED
Status
Description
Off
10Mbps connection or
no link
Yellow
100Mbps connection
Green
1Gbps connection
Speed LED
Status
Description
Off
100Mbps connection or
no link
Yellow
1Gbps connection
Green
10Gbps connection
Auxiliary Panel
A
B
1
C
D
Install CPU along with the carrier frame, do not
separate them. Please make sure the carrier frame
with CPU is closely attached to the rail frame while
inserting it.
5
Carr ier Frame with CPU
Rail Frame
Please make sure that the carrier
frame with CPU is closely attached to
the rail frame while inserting it.
Install the carrier frame with CPU. Don't separate them.
6
7
Install the Memory
1
Unlock a DIMM slot by pressing
the module clips outward.
2
Insert the memory module.
3
Lock the clips.
A1
C1
1 DIMM
#
#
2 DIMMS
#
4 DIMMS
#
#
6 DIMMS
M.2_SSD (NGFF) Module Installation
9
1
Prepare a M.2_SSD (NGFF) module and the screw.
Gently insert the M.2 (NGFF) SSD module into the
2
M.2 slot. Please be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
Tighten the screw with a screwdriver to secure the
3
module into place. Please do not overtighten the
screw as this might damage the module.
www.asrockrack.com
Close the bracket that holds the CPU. Close the
retention cover. Fasten the torx screw according to the
order A→B→C.
7
8
D1
E1
G1
#
#
#
#
#
#
20
o
NUT2
NUT1
H1
#
#
Advertisement
