Checking/Changing/Canceling Timer Settings - Sony D350P Operating Instructions Manual

Checking/changing/canceling timer
settings
Before you start...
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 10).
• When using a decoder, turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
2
58

Checking/changing/canceling timer settings

Press SET UP, then press V/v to select
(PROGRAM) and press ENTER. You can also
display the timer programming menu by
pressing TIMER.
The timer programming menu appears.
Press V/v to select setting you want to change
or cancel.
• To change the setting, press B/b to select
the item you want to change, and press V/v
to change it.
• To cancel the setting, press CLEAR.
CLEAR
SET UP
TIMER
V/v/B/b
ENTER
O RETURN
CH START END DATE SPEED
P M P M
0 1 0 5 3 1 0 7 3 1 1 /2 0 SP
A M
A M
0 3 0 1 3 1 0 3 3 2 1 /2 1 Auto
P M P M
0 6 0 6 3 2 0 8 3 2 1 / 2 1 EP
V v B b RETURN
CH START END DATE SPEED
P M P M
0 1 0 5 3 1 0 7 3 1 1 /2 0 SP
A M
A M
0 3 0 1 3 1 0 3 3 2 1 /2 1 Auto
P M P M
0 6 0 6 3 2 0 8 3 2 1 / 2 1 EP
V v B b RETURN CLEAR