Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21h
58760
Advertisement
Related Manuals for Harbor Freight Tools MADDOX MD61
Summary of Contents for Harbor Freight Tools MADDOX MD61
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Specifications
6. Do not drive the vehicle while under test. If unreadable or missing, contact 7. Before testing, review and follow instructions from Harbor Freight Tools for a replacement. the vehicle manufacturer’s service manual. 16. The warnings, precautions, and instructions 8. After testing, turn engine off and depressurize discussed in this instruction manual cannot system before removing test components. - Page 3 Features Small SCHRADER Adapter (FORD) Gauge Pressure Relief Button Standard SCHRADER Pressure Connection Relief Hose SAE J30 R2 Gauge Hose SUPERIOR AUTOMOTIVE TOOLS Item 58760 Page 3 For technical questions, please call 1-888-866-5797.
- Page 4 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Note: These instructions are intended as basic guidelines only. Follow instructions in the vehicle manufacturer’s service manual for correct test procedures.
- Page 5 Note: This is a generic procedure. Follow vehicle 17. Allow remaining fuel to drain out of Relief Hose, service instructions for correct test procedure. then remove it from the fuel collection container and seal that container. 8. Turn ignition to on position. 18.
-
Page 6: User Maintenance Instructions
User-Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY AND DEATH FROM FIRE: Do not use damaged equipment. If any damage or wear is found, have the problem corrected before further use. 1. - Page 7 Part Description 0–100 PSI • 0–700 kPa Pressure Gauge Assembly FORD SCHRADER Valve Adapter Repair Kit Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
- Page 8 This warranty gives you specific legal rights and you may also have other rights which vary from state to state. MADDOX is a trademark of Harbor Freight Tools. All other brands and trade names are the property of their respective owners.