Sony Cyber-shot DSC-P7 Operating Instructions Manual page 94

SETUP 2
Item Setting
LCD BRIGHT/
BRIGHTNESS xNORMAL/ DARK
LCD BACKLIGHT
BRIGHT/
x
BEEP SHUTTER
x
OFF
VIDEO OUT NTSC
PAL
USB CONNECT PTP/xNORMAL
POWER SAVE x ON / OFF
94
Description
Selects the LCD brightness. This has no effect on the recorded images.
Selects the brightness of the LCD backlight. Selecting [BRIGHT] makes the screen bright and easy to
NORMAL see when using the camera outdoors or in other bright locations, but also uses up the battery charge
faster. Displayed only when you are using your camera with the battery pack. When [POWER SAVE]
is set to [ON], this item cannot be set.
– Turns on the shutter sound when you release the shutter.
ON – Turns on the beep/shutter sound when you press the control button/ release the shutter.
– Turns off the beep/shutter sound.
– Sets the video output signal to NTSC mode (Japan, USA).
– Sets the video output signal to PAL mode (Europe).
Switches the USB mode (page 41).
Selects whether to use the POWER SAVE mode (page 13). Displayed only when you are using your
camera with the battery pack.