TP-Link AC1750 User Manual page 17

Chapter 3
Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
Note:
Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on
your extender, please refer to the instructions to set your 5GHz network.
¾ To extend another host network:
1. Go to
2. Enable
networks.
3. Select the 2.4GHz host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
• Move the extender closer to your router, and click
• You can manually enter the SSID (network name) and password of the network you want to extend, and
click Save.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
5. Click Save.
¾ To enable or disable the extended network:
1. Go to
Downloaded from ManualsNet.com
Settings > Wireless > Connect to
Connect to 2.4GHz Network
Settings > Wireless > Extended
search engine
Network.
and click Wireless Scanner
Rescan in the top-right corner of the list.
Network.
Customize Your Network
to find all available
Password
15