Table of Contents
Advertisement
USB Settings Main Menu Items (USB Port Equipped
Models Only)
The USB Settings main menu is available only when there is an external device connected
to the USB port of the XJ-S38/XJ-S48/XJ-S58/XJ-S68 model projector. For details, see
"USB Function Guide" on the bundled CD-ROM.
Operational Info Main Menu
Setting Name
Input
Input Signal
RCVUN
Signal Name
RCVU
Resolution
R
Horizontal
RCV
Frequency
Vertical
RCV
Frequency
Scan System
RC
Lamp Time
RCVUN
Reset Lamp
RCVUN
Time
Setting
Unit
Source
This sub-menu item shows the currently selected input
Specific
signal (RGB, Component, or VIDEO). "- - - -" is indicated
here when there is no input signal.
Source
This sub-menu item shows the signal name of the signal
Specific
being input to the projector. For details about signal
names, see "Signal Name" under "Supported Signals" on
page 33.
Single
This sub-menu item appears only when RGB is the input
signal. It shows the number of vertical pixels of resolution
of the RGB input signal.
Source
This sub-menu item shows the horizontal frequency of the
Specific
input signal.
Source
This sub-menu item shows the vertical frequency of the
Specific
input signal.
Source
This sub-menu item appears only when RGB or
Specific
component is the input signal, and shows the scanning
frequency of the input signal. The input signal is interlace
or non-interlace for an RGB signal input, and interlace or
progressive for a component signal input.
Single
This sub-menu item shows the cumulative number of
hours the current lamp has been used to date. Use this
value as a reference when deciding whether or not the
current lamp needs to be replaced. For details about
replacing the lamp, see "Replacing the Lamp" in the
"User's Guide (Basic Operation)".
Single
Use this sub-menu item to reset the lamp time to 0
hours after replacing the lamp. For details about replacing
the lamp and the lamp time reset operation, see
"Replacing the Lamp" in the "User's Guide (Basic
Operation)".
28
Description
Advertisement
Table of Contents
