ViewSonic VX2000-1 Service Manual page 47

All manuals and user guides at all-guides.com
3. The successful picture is as the following:
(There is CheckSum value appearing when the VGA and DFP success.)
4. Get into “Burn In Mode”(Ref 6-2) press any button besides “Power” button
to check if the S/N is correct.
5. Connect PC signal to VX2000. Press “ 1 ” on the select knob, then choose
“Information” to double check if the S/N is correct.
ViewSonic Corporation
Confidential – Do Not Copy
8-4
VX2000-1