Settings For The Display (Screen Setup) - Sony DVP-NS71HP Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 61).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
YC C /RGB (HDMI):
B R
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
4:3 OUTPUT:
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 Select this when you connect a
LETTER
4:3 screen TV. Displays a wide
BOX
picture with bands on the upper
and lower portions of the
screen.
4:3
Select this when you connect a
PAN SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
16:9
AUTO
YC C
B R
ON
JACKET PICTURE
ON
:
OFF
(COMPONENT OUT)
FULL
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
HDMI RESOLUTION
Selects the type of video signals output from
the HDMI OUT jack. When you select
AUTO (default), the player outputs video
signals of the highest resolution acceptable
for your TV. If the picture is not clear, natural
or to your satisfaction, try another option that
suits the disc and your TV/projector, etc. For
details, refer also to the instruction manual
supplied with the TV/projector, etc.
AUTO
Normally, select this.
1920 1080i Sends 1920 1080i video
signals.
1280 720p
Sends 1280 720p video
signals.
720 480p Sends 720 480p video signals.
Notes
• Even when a setting other than "AUTO" is
selected and the connected TV cannot accept the
resolution, the player automatically adjusts the
video signals that are suitable for the TV.
• When the HDMI indicator on the front panel
lights up, images from the S VIDEO OUT and
LINE OUT (VIDEO) jacks are enlarged
vertically. (Except when 720 480p is selected).
YC C /RGB (HDMI)
B R
Selects the type of HDMI signal output from
HDMI OUT jack.
YC C
Outputs YC
B R
RGB Outputs RGB signals.
Notes
• If the playback picture becomes distorted, set
"YC C " to "RGB."
B R
• If the HDMI OUT jack is connected to equipment
with a DVI jack, "RGB" signals will be
automatically output even when you select
"YC C ".
B R
C signals.
B R
63
,continued