Table of Contents
Advertisement
16 COOLING SYSTEM
98
Main work
–
Remove radiator cap
E01305-11
–
Loosen bleeder screw
Guideline
3 turns
–
Tilt the vehicle slightly to the right.
–
Pour in the coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant (
E01115-10
–
Completely fill the radiator with coolant. Mount the radiator
cap.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and allow it to warm up.
–
Stop the engine and allow it to cool down.
–
When the engine is cool, check the coolant level in the radia-
tor and, if necessary, add coolant.
–
Remove the cover
the coolant level up to the MAX marking.
–
Mount the cover of the compensating tank.
E01306-12
Finishing work
–
Install the right side cover.
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
–
Install the bag carrier. (
1
.
2
.
p. 121)
3
of the compensating tank and top up
(
p. 58)
p. 55)
p. 54)
p. 56)
Advertisement
Table of Contents
