Dell XPS 13 9315 Service Manual page 44

Table 5. System setup options—Integrated Devices menu (continued)
Integrated Devices
Miscellaneous Devices
Enable Fingerprint Reader Device
Table 6. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
Drive Information
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode
Table 7. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Touchscreen
Full Screen Logo
Table 8. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
44 System setup
Enables the Fingerprint Reader Device option.
By default, the Enable Fingerprint Reader Device option is enabled.
Sets operating mode of the integrated SATA hard drive controller.
By default, the AHCI/NVMe option is selected. Storage device is configured for
AHCI/NVMe mode.
Displays the information of various onboard drives.
Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD option is enabled.
Displays the information of onboard drives.
Enables or disables the SD card.
By default, the Secure Digital (SD) Card option is enabled.
Enables or disables the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is disabled.
Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
Enables or disables the touchscreen option.
By default, the Touchscreen option is enabled.
Enables or disables the computer to display full screen logo, if the image matches
screen resolution.
By default, the Full Screen Logo option is disabled.
Enables or disables the internal WLAN device.
By default, the WLAN option enabled.