Table of Contents
Advertisement
8.5.
Remove the Tuner unit
1. Remove the Side terminal cover and the Side shield
metal. (See section 8.4.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1, A6, A7 and A11).
4. Disconnect the flexible cables (A20, A31 and A32).
5. Remove the screws (×2
8.6.
Remove the A-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Remove the screws (×2
8.7.
Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Disconnect the Speaker terminal.
3. Remove the screws (×2
ers (L, R).
) and remove the Tuner unit.
) and remove the A-Board.
each) and remove the Speak-
8.8.
Remove the SU-Board
1. Remove the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding prop (×1
4. Remove the screws (×2
Board.
8.9.
Remove the SD-Board
1. Remove the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the molding prop (×1
4. Remove the screws (×2
Board.
24
).
, ×2
) and remove the SU-
).
, ×2
) and remove the SD-
Advertisement
Table of Contents
