Duplicating A Video Tape - Toshiba SD-22VB User Manual

When you try to connect with a cable, make sure the power of both units have been turned off.
Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.
1
Load a blank cassette tape with the erase prevention tab
intact into the recording DVD/VCR. Load the previously
recorded cassette tape into the playback VCR or a video
camera.
VCR
S P
2
Use AUX or CH of the recording DVD/VCR to select the
"LINE1", "LINE2" or "LINE3" instead of the preset channel.
LINE1 = TV-RGB/Composite Scart Socket
LINE2 = VCR/DECODER Scart Socket
LINE3 = Front AV jacks
Connection with second Video recorder or Video camera
Playback unit
H M S
Recording unit
Press AUX on the
recording unit repeatedly
until L3 appears.

Duplicating a Video Tape

3
Press REC/OTR and then PAUSE/STILL of Recording
unit.
4
Press PLAY-button and then PAUSE/STILL-button of
Playback unit. Now you can see the still picture of the
scene that you wish to duplicate.
5
Press PAUSE/STILL of both units simultaneously to start
the Duplicating.
Note:
Before starting the duplicating process, select the proper
tape speed using SP/LP. For a pre-recorded tape the
correct tape speed will be set automatically during
playback.
OR
(not supplied)
Playback on
camera
(not
supplied)
35